I determined the Y Main was bad so I replaced it and now all voltages are correct and it has sound now when it turns on. I brought up the test pattern by jumping ps on to ground and shorting pins 3 and four. If I turn the tv on after removing the jumper and the short the screen will flash and I hear the samsung tone but no picture is displayed. I read on a different thread that some one had the picture going black after a few minutes and replacing the main board fixed that. I was wondering if anyone else has any other things I can check.
Samsung PN63C8000 has sound no picture
Collapse
X
-
Re: Samsung PN63C8000 has sound no picture
main board is bad - has bad gamma chip. my recommendation is to send main board in to NICKS tv repair - I've had good success with this repair. Have a couple of these exact sets and still working. Be careful when removing LVDS cable - lift tab then remove LVDS cable gently -
Re: Samsung PN63C8000 has sound no picture
Just an update, I received two used (supposedly tested) main boards and still same issue. I talked to Nick's TV and he does not think it is the main board so I am now not sure what to do next. I guess I might wait for Shop Jimmy to get one in. I am able to do the RGB tests like I mentioned just fine other than the white background test it has red sparkling in the picture.Comment
-
Re: Samsung PN63C8000 has sound no picture
Just thought I would provide an update. After getting third used main board it is now working. But it was not the main board but the cable that runs between the main and the logic main. I guess it was bad. The last board I got had the cable with it and the rest is history.Comment
Related Topics
Collapse
-
by TR103Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
by MgiffuneI have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
by IerwinHello everyone,
Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
Anyway I still fully expect that there has been something seriously damaged... -
by jchangHi all
I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.
Symptom:
No picture no sound.
When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
No sound at all.
What I tried:
1. I tried unplugging the left or right ribbon... -
by marekkHi,
I got Samsung 55 inch QLED QE55Q67RAT where there is no sound at all and when using youtube for example picture is not clear and noisy.
I have swapped Burr-brown 88002A chip on the mainboard but didn't help, different set of speakers didn't help either
Mainboard is based on pcb BN41-02695A BN94-14007B
I will appreciate any help
Many thanks
Marek... - Loading...
- No more items.
Comment