Re: Philips 20PF4121/58 power inverter board problem
Hi.
I check this critical parts and also other diodes and transistors,
Q208, Q204, D201, D202, Q209, Q205, D101, D103, D100,
no faults found.
Thank you.
Philips 20PF4121/58 power inverter board problem
Collapse
X
-
Re: Philips 20PF4121/58 power inverter board problem
What's going on with Q208 where it meets the heatsink? Have you checked the diodes and MOSFETs out of circuit?Leave a comment:
-
Re: Philips 20PF4121/58 power inverter board problem
I check all resistors, standard and not standard values are OK.
Any suggestion?Leave a comment:
-
-
Philips 20PF4121/58 power inverter board problem
Hi.
I have LCD TV Philips with power inverter board problem.
TV Philips model: 20PF4121/58, chasiss LC4.1E AB
power inverter board model: DELTA DAC-12M019 AOF, REV.05
After electrical shock by storm is dead.
No any visible damage or short circuit found.
I replace some sensitive parts on board,
U101=EA1523A, Q107=11N80C3, optocoupler U100=PC817.
No power up.
Can not found schematic for this power inverter board to check carefully small smd resistors which many are not standard values and is very hard to check if resistance is correct.
Any help, experience with this power inverter board?
Thank you.Last edited by JohnNovak; 11-24-2018, 04:29 AM.Tags: None
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by Destroyer-Br[HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH
Hi everyone,
I'm working on an Acer Nitro 5 unit with the following specs:- Motherboard: LA-J871P Rev: 1B
- Model: Acer AN515-55-59MT
- S/N: NHQ7JAL00403906A973400
- SNID: 03902728734
Initial Issue
The laptop initially presented graphic issues and driver failure (Code 43) for the GPU.
After preventive maintenance (cleaning, thermal paste, etc.), it powered on normally. We disassembled it again to inspect the GPU, reassembled... -
by spantorHello partners.
Could someone tell me how to make this Philips TV source work without the mainboard being connected? The model of the board is EAX65423701 (2.1) and the model of the Philips TV is 40PFH40009/88.
The TV is dead, there is no standby light, however there is a voltage of 12v on the pins ( included 12v VAU ) and 3.2v on the PS-ON pin (see photo) when the power board is connected to the main board. If I disconnect both boards I only get 8 volts on 12v pins. I would like to rule out a fault in the main board by making it work, but so far no one has been able to tell... -
by Dani_2024Hi and thanks in advance for any input you might provide!
I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO
Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...5 Photos -
by sam_sam_samI did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow
This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board
After all of... - Loading...
- No more items.
Leave a comment: