Lg du42px12x

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • aljgardin
    New Member
    • Nov 2018
    • 4
    • United States
    #1

    Lg du42px12x

    Plasma tv with no video input working.
    Screen works.
    Menu Works.
    Coax in works, DTV scan picks up 1 channel with sound.
    Tried composite, HDMI, DVI no inputs work.
    Any help, starting point or suggestions would be great.
    Tags: None
    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago
      #2
      Re: Lg du42px12x

      Look for a Main Bd replacement

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Scruit
          What is a normal composite signal range for a C64?
          by Scruit
          Hello all,


          Working on my first C64 / Breadbin / 250407. Purchased as non-working. Getting black screen.


          More detail below, but for those that want to get right to the question.... Here are a few waveforms comparing the Pin15 output on the VIC chip (luma/sync) to the pin 4 on the AV socket (composite signal).

          https://imgur.com/gallery/PpqcqPY


          My question is: Is the composite waveform range of 0.1v-1v too low for a c64?



          More detail:


          Symptoms are that that I get...
          04-28-2022, 05:33 AM
        • CapLeaker
          Dell ATX PSU won’t start, but forcing it works fine?
          by CapLeaker
          Got a case of something new weird at work. There is an old 2nd gen Intel i3 in an old “Pizza box” shell that has a small form factor power supply. Unfortunately I forgot to take pictures and model number off it.

          Anyway, I get to work and get to look at this computer. Standby LED on the PSU is on, but the computer won't start. Hmm o.k. take the battery out of the main board try again, nothing. O.k. then… unplug the power supply from the main board and put in a full size ATX PSU (yeeeesss! Exact that blown Powerman IP that I fixed a while back), plug it in and the old...
          10-28-2024, 06:59 PM
        • rounin
          MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
          by rounin
          Hi everyone,

          I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

          🛠 Original Issue
          The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
          Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

          I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

          ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
          04-19-2025, 01:18 AM
        • ex250
          Kenwood SW-505D no sound issue and pops from time to time when it works
          by ex250
          Hello mates,

          I bought this subwoofer a few days ago used and blind and it works erratically, as far as I could see, it has been tampered with, the speaker is not the original one and of 8 Ohm when it should be of 4, and there are some welds like reworked by the boards.

          It doesn't have much power (expected more from it) and it distorts if you increase the volume over the middle, maybe it's because of the high impedance of the speaker. The problem is that it has sound when it wants, the led panels all work correctly, you can hear the power relay on power on, but right now...
          12-29-2024, 03:27 PM
        • eurowill
          a2141 820-01700 internal display not working / external works
          by eurowill
          Hey ya'll this is my first post on here. I recently aquired a used/broken 2019 mbp 16 a2141 with the 820-01700 board. Seller told me that the laptop needed a new lcd. However upon doing some troubleshooting i found out the lcd is fine.

          Laptop boots like a normal, plays chime, touchbar lights up however there is no image on the internal lcd. If i connect and external monitor while its already on, nothing happens and no image is displayed on external. However if i restart or boot the machine while its plugged in, the external then works and a backlight is now visible on the laptop....
          07-23-2024, 10:06 AM
        • Loading...
        • No more items.
        Working...