Samsung UN40H5203AFXZA submitted for your disapproval.....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ga70gto
    Senior Member
    • Oct 2014
    • 61
    • USA

    #1

    Samsung UN40H5203AFXZA submitted for your disapproval.....

    Picked up this tv because the owner described it as "dead". It is in fact not dead, it has backlights and sound when connected to a DVD player, problem is "no display". if you leave both t-con ribbon cables connected and turn the tv on there is no image.


    Picture one is if you power up the tv with the left (as viewed from the front) tcon cable disconnected.

    Picture two is if you connect the left t-con cable while the tv is on.

    Picture three is once again with the left cable disconnected but you can see different results after cleaning the ribbon cables.

    Picture four is once again connecting the left t-con cable while the tv is on. I added it just because the display is different than the first test.

    if you think it necessary I can provide pictures of the boards but didn't want to waste the space on the website if most people think it's a bad panel.

    as always, thanks for your time.
    Attached Files
  • R_J
    Badcaps Legend
    • Jun 2012
    • 9588
    • Canada

    #2
    Re: Samsung UN40H5203AFXZA submitted for your disapproval.....

    On pictures 1 & 3 I see a dark shadow near the bottom, I wonder if this tv had its screen washed and water/cleaning fluid may have corroded the panel's board, the board that the t-con cables connect to in the panel.

    Comment

    • ga70gto
      Senior Member
      • Oct 2014
      • 61
      • USA

      #3
      Re: Samsung UN40H5203AFXZA submitted for your disapproval.....

      RJ, yes now that i'm viewing these pics without the "glow" of the tv directly in front of me I see those "shadow" areas too. I had the panel out to inspect for any physical damage such as the tabs pulled off and saw none. I didn't really see any staining at the base of the panel either but I realize if this panel has been fluid damaged there's probably no help for it.

      pete

      Comment

      Related Topics

      Collapse

      • Document Archive
        Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
        09-07-2024, 05:50 AM
      • TR103
        Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
        by TR103
        Hi, I have a Samsung UE50TU with:
        - sound and backlight, but no picture
        - when it arrived, it had a picture for a few seconds
        - it keeps rebooting
        - without ribbon cable between the two panel boards, it does not reboot but I have no picture
        - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
        - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

        - without cable between mainboard and lcd panel and with a jumpered...
        01-22-2025, 04:12 PM
      • shelby5041
        Samsung LCD TV no picture backlight on no 12v at tcon
        by shelby5041
        hi
        i have a samsung lcd tv

        it powers on with sound and backlight but no picture

        all voltages from PS are good 12v 3.3v and 5v

        whats odd is that at the tcon i tested voltage across the fuse on the tcon and i get 0v

        i figured main board issue..so i ordered a used main board....when i put replacement main board in i still have same issue

        no 12v at the tcon fuse

        i disconnect the panel ribbon cables to rule out any panel issues and i still have no 12v at the tcon fuse

        the odds of having 2...
        10-08-2021, 08:21 AM
      • kca
        LG 82UN8570AUD ~ TCON or PANEL?
        by kca
        Hello all ~

        Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

        When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

        I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
        08-31-2025, 06:38 AM
      • howardc64
        Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
        by howardc64
        • Prior owner tried a replacement main board. No difference.
        • Samsung 2x red blinking standby LED = panel fault
        • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
        • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
        • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
        ...
        07-19-2025, 10:54 PM
      • Loading...
      • No more items.
      Working...