Digihome 50292UHDDLEDCNTD

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tehmatix
    Senior Member
    • Nov 2012
    • 174
    • UK
    #1

    Digihome 50292UHDDLEDCNTD

    Hi guys,
    I have this tv with a defect on picture. I push and move the tab without result.I changed the flexy from left to right, same thing. T-con board is model V500DJ6-QE1 from Innolux.
    Thanks in advance for your help
    Attached Files
    Tags: None
    • attainteddragon
      Badcaps Veteran
      • Apr 2013
      • 764
      • australia
      #2
      Re: Digihome 50292UHDDLEDCNTD

      i'll put a vote in for bad panel. not all panel failures can be patched with a tab bond shim.
      WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?

        Comment

        • budwich
          Badcaps Legend
          • Jul 2015
          • 3097
          • Canada
          #3
          Re: Digihome 50292UHDDLEDCNTD

          you can try checking a few smd components on the bottom edge board in / around the area of issue. I am thinking that perhaps a capacitor or resistor might not be happy. If you find one, and if you are careful, they can be replaced "on set" otherwise, this would be a "bad panel fault".

            Comment

            Previous template Next

            Related Topics

            Collapse
            • geo86
              Tv Digihome 50292UHDDLEDCNTD restarts and blinking standby light
              by geo86
              Hi,

              This is a smart tv:
              Make: Digihome
              Model: 50292UHDDLEDCNTD
              Power supply: Vestel 17IPS72
              Main board: Vestel 17MB130P
              Chassis: VES500QNDC-2D-N11

              The problem is this, when I plug the tv in:
              - standby light start flashing/blinking regularly
              - the backlight comes on
              - no picture, logo, pixel will come on the screen, pure black with backlight
              - the standby light will flash 27 times and the tv will restart

              No obvious bad capacitors. No shorted diodes. Checked all transistors in secondary and...
              02-02-2020, 04:29 AM
            • hayriipek
              I need Innolux LCD M185BGE-L22 bios
              by hayriipek
              I need Innolux LCD M185BGE-L22 C3-G bios
              ​...
              12-21-2024, 05:43 AM
            • vinceroger69
              DigiHome 43268FHDT2
              by vinceroger69
              Hi guys just repaired one of these sets does anyone know how i can get a user manual, i cant find much info at all about this set one site says it wireless and a smart tv but cant see either in settings or home menu
              this is all the info i can find
              https://pricespy.co.uk/audio-video/t...377/properties
              nearest manual i can find it also uses the same remote so i dont think this set is wireless or smart tv like the first link suggests
              https://www.manualslib.com/manual/11...?page=8#manual
              01-05-2022, 10:56 AM
            • Document Archive
              CHIMEI InnoLux M185BGE-L22 TFT LCD Datasheet
              by Document Archive
              M185BGE-L22 is a 18.5" TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins
              1ch-LVDS interface. This module supports 1366 x 768 HD mode and can display up to 16.7M colors. The
              converter module for Backlight is not built in.

              Screen Size 18.51” real diagonal
              Driver Element a-si TFT active matrix
              Pixel Number 1366 x R.G.B. x 768 pixel
              Pixel Pitch 0.3 (H) x 0.3 (V) mm
              Pixel Arrangement RGB vertical stripe
              Display Colors 16.7M color
              Transmissive Mode Normally white
              Surface Treatment AG type, 3H hard coating,...
              11-05-2024, 07:48 AM
            • stav242
              Digihome 50551UHDS display sync
              by stav242
              50" Digihome 50551UHDS
              Pwb :17IPS72
              Mb: vestel 17MB130S 23592996
              Panel :VES500QNDC-2D-N41

              I've replaced the above mB with a near identical one (best I can find). 17MB130S 23665848, was quoted as being from same model 50".

              Picture is out of sync.
              Could it need reconfiguring to this particular panel? Or is this a tcon/cable fault?

              note: this is the second replacement board i have tried, first one was also same model but slightly different serial. same picture out of sync.

              update : unplugging the tcon >...
              01-20-2022, 06:24 AM
            • Loading...
            • No more items.
            Working...