sharp lc-55le653u

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • CANAM13
    Member
    • Jul 2014
    • 11
    • usa

    #1

    sharp lc-55le653u

    neighbor gave me this sharp tv when he moved, said it died. I plugged it in and it came on normally, then shut its self off in 5 mins. left unplugged for an hour and powered it back on, worked again for about an hour then shut its self off again. Now nothing, no power, no standby light- no power at all.
    test top power lead from PS supply to main board. have 19v across 3 terminals that is correct, but do not have 5v ps on stand by. figured was PS board, bought a used board from ebay, installed, same syptoms with no power, no stand by 5v at main plug from ps to main board. both board don't show any bad caps or burnt solder point or parts.
    what should be my next troubleshooting steps?? Hate to throw out this nice screen. any help is greatly appeciated!!
  • dick_barton
    Badcaps Legend
    • Aug 2015
    • 6642
    • Wales

    #2
    Re: sharp lc-55le653u

    Well focused and sharp photo's of your circuit boards and how they interconnect. If you could give the voltages at the connector going to the main board and the pin name alongside (legend normally printed on the board). Power supply number. All a good start to fault finding.
    Something similar to the chart below makes for easier reading.
    Attached Files
    Last edited by dick_barton; 05-14-2018, 03:57 AM.
    Willing to help but I'm no expert.

    Comment

    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago

      #3
      Re: sharp lc-55le653u

      On these SHARP TVs there is no 5V StBy voltage, the 19V that you are getting at plug-in is the StBy voltage. DO NOT connect the 19V StBy voltage to PS-ON to test the PSU, this will damage it. Your problem though is a Main Bd. issue.

      Comment

      • CANAM13
        Member
        • Jul 2014
        • 11
        • usa

        #4
        Re: sharp lc-55le653u

        Originally posted by dick_barton
        Well focused and sharp photo's of your circuit boards and how they interconnect. If you could give the voltages at the connector going to the main board and the pin name alongside (legend normally printed on the board). Power supply number. All a good start to fault finding.
        Something similar to the chart below makes for easier reading.














        attached the photos of the boards. The legend for power off of the PS board is only printed on the PS.
        10- DIM2
        9- DIM1
        8- BLU_ON
        7- PS_ON
        6- GND
        5- GND
        4- GND
        3- 19V
        2- 19V
        1- 19V

        I have 120acv coming in to PS board, with main fused above connection testing good.
        As I stated, I have 19v across 1-3 at the PS and it continues to the main board when power cord is connected. No power/voltage anywhere else through that connector. no bulging caps or burnt parts that I can see.
        next step??
        Attached Files

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #5
          Re: sharp lc-55le653u

          So the main board is getting the 19V for it to run but it is not sending any control Voltages on pin 7 ~10 at all, ZERO Volt as you report, so something is going on with the main board.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          Related Topics

          Collapse

          • advant
            Driving a Sharp TCON/panel with a universal main board
            by advant
            This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

            I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
            02-03-2020, 12:25 AM
          • Dani_2024
            Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
            by Dani_2024
            Hi and thanks in advance for any input you might provide!
            I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
            Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

            Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
            10-28-2024, 05:06 PM
          • jb_Bak
            Sony xbr-65x900c main board issues?
            by jb_Bak
            Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

            Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
            Power Board Connector that goes to Main board
            CN6401
            Pin 01 NC
            Pin 02 NC
            Pin 03 "BL_ON": 0V
            Pin 04 "N/C"
            Pin 05 "STBY 3.3V": 3.5V
            Pin 06 "GND": N/C
            Pin 07 "AC_OFF"...
            09-27-2021, 04:52 PM
          • JDC
            (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
            by JDC
            ONN 100012588
            Issue: No Power, Then Rebooting After Main Board Change

            Short answer: replace main board and power board
            Technical answer: replace main board and Q306 & Q307 on power board.

            Long answer:

            TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
            07-15-2022, 07:39 AM
          • m1ch43lzm
            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
            by m1ch43lzm
            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
            05-12-2025, 08:37 PM
          • Loading...
          • No more items.
          Working...