Emerson LF501EM4A...first succesful screen replacement!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DXseekerMO
    Badcaps Legend
    • Feb 2018
    • 1119
    • US
    #1

    Emerson LF501EM4A...first succesful screen replacement!!

    I picked up this Emerson LF510EM4A last night with a broken screen. I got the same model TV from a Laundromat about a month ago. It had bad LED's and a good display screen.

    When I checked the panel part numbers they were the same!

    This morning I started swapping the screen. I tried lifting the broken one by hand. It flexed and cracked right down the middle. That's when I said it's time to go to Harbor Freight and get a couple suction cups.

    After getting them I took apart the Laundromat TV, suction cupped the screen and it came out and went back in perfect!

    The moral of the story: suction cups are a must for screen removal and replacement! They're just as handy as a bag around bread, a can around Pepsi and a pocket on a t-shirt!
    Attached Files
    They call me......."threadkiller"
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12194
      • U.S.
      #2
      Re: Emerson LF501EM4A...first succesful screen replacement!!

      Nice job, I think suction cups are the best way to equalize the pressure, it seems like they are just too fragile to grab up from laying flat with 2 or 3 people even, if I had to try it without suction cups, I would try it from an upright position instead of laying flat and that would be a tough job too.

        Comment

        • martino
          Not so "senior"
          • Aug 2013
          • 997
          • canada
          #3
          Re: Emerson LF501EM4A...first succesful screen replacement!!

          What suction cups did you get? pictures? Thinking of getting some,I got a few 60" and a 55" curved that I have been stalling on in fear of crcking the screen.
          Proud owner of dozens of broken TV's and many,many,many boards.


          Our website and passion:http://hollenhundshepherds.com/

            Comment

            • DXseekerMO
              Badcaps Legend
              • Feb 2018
              • 1119
              • US
              #4
              Re: Emerson LF501EM4A...first succesful screen replacement!!

              Here you go!
              Attached Files
              They call me......."threadkiller"

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Ryan.man
                  Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                  by Ryan.man
                  Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                  My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                  This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                  02-04-2025, 12:23 PM
                • reformatt
                  Macbook Air M2 A2681 Kernel panics after screen replacement
                  by reformatt
                  Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                  It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                  07-31-2025, 08:37 PM
                • smic717394
                  iphone XS turns off when press on screen.
                  by smic717394
                  Hi,

                  I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                  07-25-2024, 10:16 AM
                • Chrissygizmo
                  Samsung UE55JU6800K half screen dark
                  by Chrissygizmo
                  Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                  I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                  02-10-2025, 12:33 AM
                • spice_disc
                  Vizio TV M50-C1 reboot cycle and static on screen
                  by spice_disc
                  I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                  The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                  1 Photo
                  09-08-2024, 02:37 PM
                • Loading...
                • No more items.
                Working...