marillo
Member
Last Activity: 10-10-2024, 06:11 AM
Joined: 09-15-2024
Location: Munich
-
thanks for your help, time and effor. really appreciate it. may i ask whoch part of Germany are you from?... -
i got a headache... it s such a sysiphus work... i didnt manage, nothing has changed. keeps going off and on. on one sec... off two seconds... than on sec... and so on... it s frustratingLeave a comment:
-
i checked yeaterday, before destroying this one... results seemed to be the same... and what wouod be tghe next step when i accomplish to separatenthe two pins? qould it work or anything else to do? i read also that some managed just by taping some part on the lvds cable?...Leave a comment:
-
alright, makes sense. so i will need to figure out how to remove the transistor properly. and can you tell me what will be then next step after i remove the two pins?...Leave a comment:
-
well i m not sure if it was working? how do you know if i may ask? the tv was and iscin a bootloop... 🤷♂️...Leave a comment:
-
nooo... this was not the one with trouble shooting of course... the videos i made with the one which panel is not damaged! i got one with broken panel, in order to check if the reason is the mainboard...
the "good" tv is standing, and from that i took the measures. the bad one, with broken panel and now broken transistor is laying... so no damage caused (yet)
...
Leave a comment:
-
should i remove the remaining part as well... tried to turn it on.... same as before just boot loopLeave a comment:
-
well 1st one failed...
this is tough to do... i should have tried fingernail lol
i think it was too hot so it fell apart... but i couldnt get the pins up otherwise...
so this was the same model with a broken panel, where i just did this test. i have the same tv with the not broken panel, just reboot problem, so i m not sure how will i manage this in order not to destroy everything......Leave a comment:
-
you mean with a soldering device to remove the two legs?Leave a comment:
-
Q001: [url]https://www.dropbox.com/scl/fi/ftpd47fjxq71dz4eg8zeb/2024-09-23-18.53.03.mp4?rlkey=lcyljibdm0iy3nwlnbn5aw6c0&dl=0[/url]
c621: [url]https://www.dropbox.com/scl/fi/af9o7vlnd29t6ddiio4wn/2024-09-23-18.56.21.mp4?rlkey=57irypbvq5fmod3cd40bqlg9y&dl=0[/url]
D007 & D008: [url]https://www.dropbox.com/scl/fi/pqosr8uj6ydrjyha1orvt/2024-09-23-19.00.39.mp4?rlkey=7jaipsln7er2p2r56udag44zk&dl=0[/url]
i hope you can read something from these videos...Q001: [url]https://www.dropbox.com/s...6c0&dl=0[/url]...Leave a comment:
-
i will upload some videos tomorrow... i measured everything today and recorded it. i hope i did it correctly, just dont laugh at me please... also i dont know how to interpret the readings... so i hope you csn help me with these resultsLeave a comment:
-
Leave a comment:
-
Leave a comment:
-
right panel board [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463913}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463914}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463915}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463916}[/ATTACH]right panel board [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463913}[/ATTACH]...
Leave a comment:
-
the middle panel board [ATTACH=JSON]{"data-align":"none","data-size":"large","data-attachmentid":3463907}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"large","data-attachmentid":3463908}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"large","data-attachmentid":3463909}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"large","data-attachmentid":3463910}[/ATTACH]the middle...
Leave a comment:
-
thats the left side [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463904}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463903}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463902}[/ATTACH] [ATTACH=JSON]{"data-align":"none","data-size":"full","data-attachmentid":3463901}[/ATTACH]thats the left side...
Leave a comment:
-
here are the pics. ihope thats what you mean? the lvds cable is currently disconnected. and also the two, U ribbon cables as well. with this configuration the led backlight stays on.
but once i connect the lvds cable from panel to main boardit goes on and off, despite the u ribbon cables disconnected...Leave a comment:
-
and when i disconnect the LVDS cable the backlight stays on...Leave a comment:
-
Thanks [USER="75051"]Diah[/USER]. Attached a video. This is the situation when the LVDS is connected to the main board. It just goes on and off. The other two U ribbon cables are disconnected!DiahThanks [USER="75051"]Diah[/USER]. Attached a video. This is the situation when the LVDS is connected to the main board. It just goes on and off. The other two U ribbon cables are discon...Leave a comment:
-
Samsung GQ65Q60 QLED
Dear all,
I m new to this forum. I tried to sell my broken TV, which reboots constantly. And a guy told me that i could fix it somehow by taping some ports. I have no clue sadly how to do it and I am hoping someone can help me.
My TV has the issue, when I turn it on it just keeps going off and on. I dont see any Samsung logo.I just see the LED backlights on and off. When I disconnect the ribbon cable, which connects the mainboard to the TV panel. The LED backlights stay on.
Is there someone who can help with this particular TV. I can post pictures, and videos later?...
No activity results to display
Leave a comment: