Toshiba 49L621U

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kristapMA
    Member
    • Apr 2018
    • 20
    • USA

    #1

    Toshiba 49L621U

    Hi. I have a Toshiba 49L621U TV that isn't working. Originally the screen was black with audio and when I would unplug it and plug it back in, it would turn on and work fine for a few days. Now I can't do that. And I am not sure if my kids blindly pushed buttons and changed a setting but now I can't hear the audio anymore either.... When i shine a flashlight, only sometimes can I get a real faint image but not all the time..... The toshiba logo does come up when you first turn it on.

    would this be worth trying to fix or cheaper to just buy a new one? I have had it just under a year and a half so its not old at all
    Last edited by kristapMA; 04-16-2018, 11:33 AM.
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 8179
    • Canada

    #2
    Re: Toshiba 49L621U

    if it is not even a year old, warranty should be taking care of that!?

    Comment

    • kristapMA
      Member
      • Apr 2018
      • 20
      • USA

      #3
      Re: Toshiba 49L621U

      Originally posted by CapLeaker
      if it is not even a year old, warranty should be taking care of that!?
      Next month will be a year and a half... So over a year...

      Comment

      • kristapMA
        Member
        • Apr 2018
        • 20
        • USA

        #4
        Re: Toshiba 49L621U

        I was finally able to take the back off... Here is what I have....
        Any help would be appreciated.
        Attached Files

        Comment

        • dick_barton
          Badcaps Legend
          • Aug 2015
          • 6643
          • Wales

          #5
          Re: Toshiba 49L621U

          As a 4K TV I would have thought an attempt to fix it would be worth while. Post some photos of the circuit boards and their interconnections.

          Edit,
          I see that you have posted pics while I was typing.
          Willing to help but I'm no expert.

          Comment

          • dick_barton
            Badcaps Legend
            • Aug 2015
            • 6643
            • Wales

            #6
            Re: Toshiba 49L621U

            Can you post a clearer image of the section shown in the red box.
            Attached Files
            Willing to help but I'm no expert.

            Comment

            • kristapMA
              Member
              • Apr 2018
              • 20
              • USA

              #7
              Re: Toshiba 49L621U

              Originally posted by dick_barton
              Can you post a clearer image of the section shown in the red box.
              I put it back on the wall. I will see if my husband will help me take it back down when he gets out of work so I can get a better pic of the area you have the red box on.

              Thank you for your help

              Comment

              • CapLeaker
                Leaking Member
                • Dec 2014
                • 8179
                • Canada

                #8
                Re: Toshiba 49L621U

                Originally posted by kristapMA
                Next month will be a year and a half... So over a year...
                Ooops... a year and a half! Well that sux. Do you have a muli meter in order to do some voltage tests?

                Comment

                • kristapMA
                  Member
                  • Apr 2018
                  • 20
                  • USA

                  #9
                  Re: Toshiba 49L621U

                  Originally posted by CapLeaker
                  Ooops... a year and a half! Well that sux. Do you have a muli meter in order to do some voltage tests?
                  My brother is going to let me use his. Once I get that, i will be able to do more, in the mean time I am trying to get an idea of what I will need to test and what I should be looking for.

                  Comment

                  • kristapMA
                    Member
                    • Apr 2018
                    • 20
                    • USA

                    #10
                    Re: Toshiba 49L621U

                    Originally posted by dick_barton
                    Can you post a clearer image of the section shown in the red box.
                    Here is an image of what you had in the red box....
                    Attached Files

                    Comment

                    • kristapMA
                      Member
                      • Apr 2018
                      • 20
                      • USA

                      #11
                      Re: Toshiba 49L621U

                      Originally posted by CapLeaker
                      Ooops... a year and a half! Well that sux. Do you have a muli meter in order to do some voltage tests?
                      CapLeaker, I have the multi meter but not sure exactly what I need to test?

                      Edited to add, i saw a video and checked the standby power and it was 5volts so i think that is good according to the video.
                      Last edited by kristapMA; 04-21-2018, 02:17 PM.

                      Comment

                      • nomoresonys
                        Badcaps Legend
                        • Jan 2013
                        • 12210
                        • U.S.

                        #12
                        Re: Toshiba 49L621U

                        https://www.youtube.com/watch?v=4v8DcqCNG4A testing video, test the connector in post #10 P802, test with tv plugged in that's standby, then turn on tv see if readings change, report readings for both states back here, for example pin one on standby 16 volts, tv on 16 volts or whatever reading you get.
                        Last edited by nomoresonys; 04-21-2018, 02:30 PM.

                        Comment

                        • nomoresonys
                          Badcaps Legend
                          • Jan 2013
                          • 12210
                          • U.S.

                          #13
                          Re: Toshiba 49L621U

                          Test all 15 pins, the legend/map is to the left, see it?

                          Comment

                          • budm
                            Badcaps Legend
                            • Feb 2010
                            • 40746
                            • USA

                            #14
                            Re: Toshiba 49L621U

                            Also please make sure to put down the pin names so we can easily see what each pin is and what Voltage it has in two conditions.
                            Never stop learning
                            Basic LCD TV and Monitor troubleshooting guides.
                            http://www.badcaps.net/forum/showthr...956#post305956

                            Voltage Regulator (LDO) testing:
                            http://www.badcaps.net/forum/showthr...999#post300999

                            Inverter testing using old CFL:
                            http://www.badcaps.net/forum/showthr...er+testing+cfl

                            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                            http://s807.photobucket.com/user/budm/library/

                            TV Factory reset codes listing:
                            http://www.badcaps.net/forum/showthread.php?t=24809

                            Comment

                            • kristapMA
                              Member
                              • Apr 2018
                              • 20
                              • USA

                              #15
                              Re: Toshiba 49L621U

                              Originally posted by nomoresonys
                              https://www.youtube.com/watch?v=4v8DcqCNG4A testing video, test the connector in post #10 P802, test with tv plugged in that's standby, then turn on tv see if readings change, report readings for both states back here, for example pin one on standby 16 volts, tv on 16 volts or whatever reading you get.


                              Standby
                              1 - 0 - 16v2
                              2 - 0 - 16v2
                              3 - 0 - 16v2
                              4 - 0 - gndp
                              5 - 0 - gndp
                              6 -0 - 16va
                              7 - 0 -gnda
                              8 - 0 - 16v2
                              9 - 0 - gndp
                              10 - 5 - 5v1
                              11 - 0 - acd
                              12 - 0 -pwon
                              13 - 0 -blon
                              14 - 5 - 5v1
                              15 - 0 - dim

                              POWER ON

                              1 - all the way - 16v2
                              2 - all the way - 16v2
                              3 - all the way - 16v2
                              4 - 0 -gndp
                              5 - 0 - gndp
                              6 - 0 - 16va
                              7 - 0 - gnda
                              8 - 0 - 16v2
                              9 - 0 -gndp
                              10 - 5 - 5v1
                              11 - 3 acd
                              12 - just under 4 -pwon
                              13 - just under 4 - blon
                              14 - 5 -5v1
                              15 - 3 - dim

                              When I tested 10 when the tv was on, the lights (LED) flickered on then off..

                              is this what you were talking about?
                              Last edited by kristapMA; 04-21-2018, 02:58 PM.

                              Comment

                              • dick_barton
                                Badcaps Legend
                                • Aug 2015
                                • 6643
                                • Wales

                                #16
                                Re: Toshiba 49L621U

                                I think you have a led problem. Can you measure the voltages on the connector in the yellow box and note the voltages on each pin at switch on. It may rise quickly and then drop just as quickly.
                                The legend in the yellow box also says what the led voltage should be but I cannot read it.
                                Attached Files
                                Willing to help but I'm no expert.

                                Comment

                                • kristapMA
                                  Member
                                  • Apr 2018
                                  • 20
                                  • USA

                                  #17
                                  Re: Toshiba 49L621U

                                  Originally posted by dick_barton
                                  I think you have a led problem. Can you measure the voltages on the connector in the yellow box and note the voltages on each pin at switch on. It may rise quickly and then drop just as quickly.
                                  The legend in the yellow box also says what the led voltage should be but I cannot read it.
                                  should i measure it with the tv on, off or both like before?

                                  Comment

                                  • dick_barton
                                    Badcaps Legend
                                    • Aug 2015
                                    • 6643
                                    • Wales

                                    #18
                                    Re: Toshiba 49L621U

                                    Place your probe, black to chassis and red to connector pin with meter set to 200V DC range and then switch on the set and note the maximum voltage read by your meter and what it may drop to. Switch off the set and move the red probe to next pin and repeat. There should be a legend giving the pin names of the connector alongside or close by.
                                    Last edited by dick_barton; 04-22-2018, 10:41 AM.
                                    Willing to help but I'm no expert.

                                    Comment

                                    • kristapMA
                                      Member
                                      • Apr 2018
                                      • 20
                                      • USA

                                      #19
                                      Re: Toshiba 49L621U

                                      Originally posted by dick_barton
                                      Place your probe, black to chassis and red to connector pin with meter set to 200V DC range and then switch on the set and note the maximum voltage read by your meter and what it may drop to. Switch off the set and move the red probe to next pin and repeat. There should be a legend giving the pin names of the connector alongside or close by.
                                      1 - 4 down to 3 = VLED1-
                                      2 - 4 to 3 = NC
                                      3 - 4 to 3 = VLED2-
                                      4 empty = NC
                                      5 empty = VLED3-
                                      6 empty = NC
                                      7 empty = NC
                                      8 empty = NC
                                      9 - 1 to 0 = NC
                                      10 empty = NC
                                      11- 1 to 0 = VLED+
                                      12 empty = VLED+
                                      13 - 1 to 0 =VLED+

                                      Other Legend says -
                                      5v1=1.52A
                                      16v2=2.42A
                                      16VA=1.50A
                                      vled=1.005A

                                      Started with 1 being the red wire to the left and moved to the right
                                      Also attached the pic of my meter to make sure i have it set right and am reading it right?
                                      Attached Files

                                      Comment

                                      • nomoresonys
                                        Badcaps Legend
                                        • Jan 2013
                                        • 12210
                                        • U.S.

                                        #20
                                        Re: Toshiba 49L621U

                                        Can pick up a digital meter for 10 bucks or so, don't have to have one but they are easier to work with for new operators.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • andariego
                                          Toshiba 49L621U Parental Lock
                                          by andariego
                                          Hi, I have this TV Toshiba 49L621U that has the parental lock activated and I don't have the pin code, someone knows how to remove it, I have the original control, I have already tried pressing the "INFO" button four times, the control does not have the button. "RECALL". In advance thanks for the help.
                                          06-01-2021, 11:27 AM
                                        • anlu
                                          Vestel Firmware - Toshiba 32W133DN
                                          by anlu
                                          Hello, i have an old Toshiba 32W1333DN (sorry, misspelled the headline) TV that had the standby led green/red flashing and no lightup problem, i repaired it by measure the led output as suspect led problem, i measured the LED:s one by one and found one bad led, i replaced the the led-straps and the TV works.

                                          Now i need to update the software because the new rc "RM-L890" does not work and i think maybe it could be an firmware issue?, i have struggled to find it without any success because all of the links where invalid, i contacted Toshiba but they do not support this model...
                                          02-04-2023, 12:59 AM
                                        • Cardioman
                                          Toshiba 49L621U Led Tv Or Power supply
                                          by Cardioman
                                          Looking for a Toshiba 49L621U service manual, or power supply schematic for a led set that uses Power supply/LED driver PK101W1230I. Would purchase if required! Thanks!
                                          08-31-2020, 12:21 PM
                                        • zioricci
                                          Toshiba P855 only works with battery
                                          by zioricci
                                          Hi,

                                          I have a Toshiba satellite P855 that was previously stuck on the Toshiba logo and I couldn't enter the BIOS with F2 and then, thanks to the 2 original bios files that hardware1 gave me, yesterday I was able to boot it up to Windows 11. I deduced that the fault was the corrupted bios. So all the hardware works, hard drive, graphics card, RAM etc. The problem is that everything works if I power it with only the main battery, as soon as I take it out and put the charging cable in, the laptop, although it always succeeds entering bios with F2, hangs on Toshiba logo. I tried doing...
                                          03-31-2023, 01:24 PM
                                        • RainStorm
                                          Toshiba 49l621u BL_ON to DIM jump repair
                                          by RainStorm
                                          I just got this TV in today, and originally it would flash the logo and have no backlight afterwards. I could see the image without the backlight with a flashlight.

                                          Having no 9V batteries or anything on hand, and all the backlight LEDs looking fine during the flash, I decided to jump BL_ON and DIM on the power board/mainboard (White and purple wire) with them still plugged in using some scissors to connect my shielded voltmeter cables.

                                          After jumping a few times, the backlight stayed on. Why?

                                          I didn't measure any voltages beforehand... So just wondering...
                                          09-07-2021, 01:48 PM
                                        • Loading...
                                        • No more items.
                                        Working...