Sharp LC-32AD5E-BK Vertical sync/Framerate error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Moreno83
    Badcaps Legend
    • Jun 2014
    • 2008
    • The Netherlands
    #1

    Sharp LC-32AD5E-BK Vertical sync/Framerate error

    Hi guys ,

    A friend of mine has got this Sharp lcd tv. It has a problem with the HDMI input.
    On both HDMI input he gets the error as on the video that i attached.
    The picture on the video should be still but its rolling......

    The fault is not there on VGA/SCART etc , only HDMI.


    I don't have any pictures of the inside yet. Anyone got a idea? Also can someone tell me what cap on the mainboard is causing the startup problems of this model? If i can fix the tv i would like to replace the cap to prevent future problems.

    Thanks.
    Attached Files
    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
    Tags: None
    • Moreno83
      Badcaps Legend
      • Jun 2014
      • 2008
      • The Netherlands
      #2
      Re: Sharp LC-32AD5E-BK Vertical sync/Framerate error

      Pictures in this thread!

      https://www.badcaps.net/forum/showth...t=LC-32AD5E-BK
      I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

        Comment

        • Moreno83
          Badcaps Legend
          • Jun 2014
          • 2008
          • The Netherlands
          #3
          Re: Sharp LC-32AD5E-BK Vertical sync/Framerate error

          Anyone got some suggestions? Im leaning towards the caps on the mainboard.
          I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

            Comment

            • Davi.p
              Hobbist Tech
              • Sep 2009
              • 4287
              • Italy - Milan
              #4
              Re: Sharp LC-32AD5E-BK Vertical sync/Framerate error

              Why you zipped the file? Anyway i'm unable to see MP4 files i think.. or Apple movies, but if all the thing i have to know is the image vertically rolls then it is maybe something in the hdmi port config, check the service manual on how to restore DDC eeprom setting.

                Comment

                • Moreno83
                  Badcaps Legend
                  • Jun 2014
                  • 2008
                  • The Netherlands
                  #5
                  Re: Sharp LC-32AD5E-BK Vertical sync/Framerate error

                  I had to zip the file because i can't attach any video format. It looks like the old tv's when you select a channel you had to adjust it to get it steady.
                  I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • ninja_zx11
                      Sharp LC-70LE650U vertical black and red bars
                      by ninja_zx11
                      Hi all,

                      70" LED TV is Sharp LC-70LE650U.

                      Initial problem was horizontal lines and slow motion lurrs on the bottom left of the screen. So I removed both the left and right ribbon cables from the T-con board and tried to clean it with alcohol and when I put it back, this issue appeared. I tried carefully reinserting the ribbon bon cables but same thing. I checked the traces of the ribbon cables with magnifying glass and everything looks good. I cleaned the small jumper ribbon cable on the left side of the screen which cured the horizontal line and slow motion blurs...
                      07-07-2023, 11:27 PM
                    • valvashon
                      Sharp LC19SB24U; red vertical line comes and goes
                      by valvashon
                      Yes, this is a very old Sharp 19" but I would like to fix it if possible. As you can see from the attached picture there is a single red vertical line.
                      Yesterday when I turned the set on, it was there for about 30 minutes then disappeared and did not show up again (set was on for another 3 hours or so).
                      Today it was not there when I powered the set on, then appeared after about 15 minutes. Set has been on for about an hour and it's still there.
                      From what I have read I'm guessing that this might be the t-con board and not the display itself as it does come and go.
                      ...
                      02-03-2023, 10:02 AM
                    • mopenstein
                      Looking for Vertical IC for RCA Chassis CTC159L CRT
                      by mopenstein
                      I'm working on my 27" RCA console TV built in 1990. It had some vertical rollover for a few months that went away after being powered on for a few minutes. I had been meaning to open it up and check it out but it had total vertical collapse before I could get to it.

                      Now that I have the time I opened it up and found a couple leaky capacitors around the vertical ic. So I figured the caps went bad and cooked the vertical IC.

                      I got the caps out and replacements on order. But when I took out the Vertical IC I saw that the chip numbers have been almost completely wiped...
                      09-24-2023, 10:41 AM
                    • AJ2021
                      Sharp LC80UH30U Vertical Band
                      by AJ2021
                      Hi all,

                      I just moved to a new apartment and now I got a vertical band on my tv. The band is changing colors all the time. Is there a fix for this? If someone has had the same problem and fixed it I would really appreciate the help as I am retired and on a fixed income and cannot afford a new tv.

                      I can change any boards and bad caps but I'm not good with a volt meter.

                      Thank you very much for any assistance....
                      01-30-2022, 10:57 AM
                    • Stanley1843
                      Screen Display Vertical Multicolor Lines
                      by Stanley1843
                      Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesn’t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
                      06-29-2024, 11:54 AM
                    • Loading...
                    • No more items.
                    Working...