Tecknika X23/50G (23" Tesco telly) LCD23-231-BL-G

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 6BW6
    Senior Member
    • Jan 2015
    • 55
    • UK
    #1

    Tecknika X23/50G (23" Tesco telly) LCD23-231-BL-G

    No tuning digital or any indication on of tuning on analogue except for the tuning bar.

    I suspect it may want a software flash n' update, anyone know of a source? Thanks,

    Dave

    Edit: anyone know the service menu?
    Last edited by 6BW6; 11-04-2017, 04:42 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • chth96
      Is it possible to test small ceramic disc capacitor with analogue meter?
      by chth96
      I read EBOOK of Testing Electronic Component and found that

      "In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
      Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
      It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."

      Is it really possible to test small ceramic disc capacitor with analogue...
      03-09-2024, 10:03 PM
    • techpointhull
      S3 Graphics LS3440 - Analogue not working on both DVI-I ports
      by techpointhull
      Hi Guys,

      Weird one here. I have a special GPU made by DFI (Model LS3440) from an Arcade gaming machine. The GPU uses the S3 440 GTX Chipset, and has dual DVI-I ports. For some reason, the analogue has stopped working on both outputs (DVI-I to VGA cable). DVI-D and digital outputs work fine, just the analogue that has stopped working.

      Now, I could get around this by using Active cables to convert the signal over to Digital, but its got me wondering exactly what the issue could be. I have inspected the GPU and DVI ports under my microscope, but nothing stands out. Because...
      12-06-2023, 10:30 AM
    • Evets
      Dynamco analogue oscilloscope
      by Evets
      I have recently acquired a Dynamco D7100 analogue oscilloscope without a user manual. As this is the first time I have owned or used an oscilloscope I would like to try and find an instruction book. The manufacturers no longer hold any information and a Google search only found one site but when I downloaded a 'service manual' all I got was gobbledegook. Any help would be gratefully appreciated or even pointers to a generic manual where I could learn more.
      08-30-2024, 06:54 AM
    • jjne
      Bad DC offset on Onkyo TX NR414 - doesn't appear to be in the analogue section
      by jjne
      I have a TX NR414, well I have two actually which are both exhibiting the same issue.

      The one I've had since 2012 developed DC offset of around a volt under load on the front right speaker output. Not enough to trip the protection but enough to be noticeable in terms of sound quality. I checked the preamp board and couldnt see anything obvious. The offset is too high really to be a drift issue right?

      I put the amplifier away for a while. I managed to pick up another example with a dead HDMI board very cheaply (common on these - mine was replaced by Onkyo several years...
      07-28-2025, 07:51 AM
    • vinceroger69
      (uk) tesco hudl 1 and hudl 2
      by vinceroger69
      Hi guys im seeing a lot of these lately where people have decided too do a factory reset to sell them on etc etc but theirs a issue tesco have turned of there servers so you cant get past the activation/set up process i will link a google post so you can see what i mean would loading a custom rom make them usable again?
      https://www.theguardian.com/money/20...wbmOHgsm3Nzwks
      https://forums.moneysavingexpert.com...k0QyqxjiW9-9Qy...
      09-17-2020, 11:46 AM
    • Loading...
    • No more items.
    Working...