Hi ! I've Samsung LE40B530P7WXRU. Doesn't works all HDMI. I want to change HDMI chip. Please help me with HDMI chip identification. Photo I attached. Many thanks in advance !
-
-
Re: Help with HDMI chip identification !
Possibly IC303. Put the markings on it into a search engine to confirm. -
Re: Help with HDMI chip identification !
Thanks for reply ! Did you mean IC3003 ?
Please see the picture, that I attached
Comment
-
Re: Help with HDMI chip identification !
The WT61P8 is a microcontroller for flat panel display control and power management with 1) Turbo 8052 CPU, 2) 64K bytes flash memory, 3) 1K+256 bytes SRAM, 4) 8 8-bit PWMs, 5) DPMS detector(2 H/V inputs, Support H+V input) , 6) 4 timers and 2 UART Ports, 7) 2 DDC/CI interface, 8) Slave I2C interface, 9) 8 channel 8-bit A/D converter, 10) Real Time Clock, 11) Watch-dog timer, 12) Embedded ISP function, 13) Power down mode, 14) Embedded ICE mode. 15) H/W CEC
http://www.weltrend.com.tw/en-global...tail/66/77/220Comment
-
Re: Help with HDMI chip identification !
I did mean that IC but then I can't see the markings of the whole board.Comment
-
Re: Help with HDMI chip identification !
The D600x parts near the HDMI connectors are just protection diodes and unlikely to be the fault
If the traces route themselves into the main processor, you have no chance of repairing it because that's probably BGA with custom firmware.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Help with HDMI chip identification !
It is SEMS12 with 324 balls.Comment
-
Re: Help with HDMI chip identification !
Your hdmi ports look different. Have you examined ports for damage?I assume no responsibility for any stupid suggestions I might post.Comment
-
Re: Help with HDMI chip identification !
Yes I examinedComment
-
Re: Help with HDMI chip identification !
Can you post a clear picture of the entire main board?
See the top diff pair traces that go from each HDMI connector? They head north, but we need to see the entire board. follow those traces and that's where the HDMI controller is located.
EDIT: Did you pick this TV up, or is this TV yours? What happened to it?
Please post a picture of the entire board. How many HDMI ports do you have? only 2? 3? 4? Do any of the other ports work?
I'm curious because on some TV sets, HDMI 1/2 are passed through a HDMI multiplexer, while HDMI 3, for example, is a direct input to the video processor. If your TV has just an issue with an HDMI mux, then it's easy to just replace the SMT part and get going again.
If the inputs go directly to the video processor and neither ports work, then you'll have a tougher time trying to figure that out.
What have you tried doing so far? If you haven't already:
1. Ohm out the traces between the HDMI connector - check for shorts
2. Ohm out the trace between the HDMi connector, and the protection diodes.
3. Ohm out the protection diodes from one side to the other.
4. Ohm out the trace from the protection diode to the HDMI chip (which isn't shown in your pic).
5. Check the power supplies on the board - find the datasheet for the HDMI chip, and see if hte associated pins have power (measure across the capactors around the device).
6. post a picture of the entire main board so we can get a good idea of the topology.
Do that and report back
Thanks!
-ThomasLast edited by ngth82; 07-30-2017, 01:48 PM.-Thomas
I'm a hardware engineer focused on networking equipment for my day job. I void warranties and fix consumer electronics for fun.Comment
-
Re: Help with HDMI chip identification !
Many thanks for the reply ! But I don't have the board at this time. I take the photo from other board, where doesn't work TV tuner.Comment
-
Re: Help with HDMI chip identification !
Follow the hdmi traces from the connectors. In your pic they disappear out the top of the pic. They either go to a switching ic or to a microprocessor, in which case the functions are integrated.Comment
-
Re: Help with HDMI chip identification !
Many thanks for reply !Comment
-
Re: Help with HDMI chip identification !
It is a SEMS 12, located under the heatsink. Unless you have proper equipment + skills for BGA rework you are out if luck. The board can be found many places for 35-50USD.Comment
-
Re: Help with HDMI chip identification !
SEMS12 are £3.50+ on Ali, I guess it depends on the OPs tools/skills, worth replacing before buying a mainboard.Comment
-
Hi
I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
The SPI chip is an Winbond 25Q256JWEQ model (1V8).
The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.
I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6... -
Hello,
i want to repair an Onkyo TX-NR809 receiver.
symptoms:
on power on, display appears and i hear one click. enue functions is given.
- no hdmi output
- audio output not tested, but i think it is not there
- usb sticks are not recognized
if i read out the chips with display+standby button + tone+
both dts show only ????
chip is D830K013BZKB4
things i have done:
- reflow of the dts chip without taking off and reballing
- changed the aluminium caps without the big one with 25v because i dont...08-25-2025, 01:04 AM -
Hello !
i have an to repair an hp omen 17cb1008tx.
i have a short on a power supply chip, sempt powering the chipset. the chip was burned, but i can read the chip making code but i can't find any references. chip reading is AWSBVC. the chip have an output directly on a coil. sempt to have no damage on the rail behind but can't confirm.
can you help me find a reference for this ic ?... -
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Long story short:
- dad converted Asus Chromebox CN62 into Windows compatible, with mrchromebox BIOS, years and years ago
- gave the computer to his son a couple years later
- son now decided to revert it to Chrome OS, to sell it as original (re-writing BIOS with the backup one created by his dad)
- too lazy to remove the board from the case, thought a voltage regulator was the BIOS chip (you know... it has 8 legs)
(seems like the story was not that short)
He used alligator clips to read the chip. No luck reading it. Removed chip and placed on a SOC-8...
Comment