teac le4087fhd stuck on standby

[The_Todd]

Hello guys,

I have a Teac tv that the red light it always on,

After looking into it, it does send the power on signal and these are the readings i get

5v = 5.4v
12v = 11.6v (11.9v without load)
24v = 24.3v

Nothing seems too bad on the board, I cant see any faults with the componets and the caps look perfect.

I am a little curious if the slightly lower 12v is causing issues.

I have also tested with inverter disconected, no difference,

What do you guys think?



Cheers,

[The_Todd]

Re: teac le4087fhd stuck on standby

And mainboard

[Hamie]

Re: teac le4087fhd stuck on standby

Here's your fault. Wither you can get a preprogrammed replacment or are able to reprogramme it yourself

[Hamie]

Re: teac le4087fhd stuck on standby

If this matches your panel sticker it should work.

http://www.ohmsupplies.co.uk/epages/...8&Locale=en_AU

[The_Todd]

Re: teac le4087fhd stuck on standby

WOW, thanks, it looks like yo are spot on,

but now you have opened a Pandora box of learning to me haha

I like the idea of programing my self, but as far as the chips concerned, whats the chances of reading the BIN off it? including trying to freeze it?

cheers,

[dskall]

Re: teac le4087fhd stuck on standby

https://www.youtube.com/watch?v=Qy8fh-g5DOM

[The_Todd]

Re: teac le4087fhd stuck on standby

Here's your fault. Wither you can get a preprogrammed replacment or are able to reprogramme it yourself

Hey just to follow up, one chip reader/writer and a whole lot of reading later I have a working TV, thank you for the help. I will upload the eprom BIN soon.

Cheers