Jump broken led diode

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • realdealthill
    Senior Member
    • Nov 2016
    • 53
    • USA
    #1

    Jump broken led diode

    Hi guys,
    I have a un46d6003..With 2 burned out led diodes.. Is there any way I can just solder a wire to neg and pos to close the circuit????
    Attached Files
    Last edited by realdealthill; 04-08-2017, 07:28 PM.
    Tags: None
    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa
      #2
      Re: Jump broken led diode

      Not advised each led you eliminate increases the load on the rest of the leds causing more failures.
      I assume no responsibility for any stupid suggestions I might post.

        Comment

        • realdealthill
          Senior Member
          • Nov 2016
          • 53
          • USA
          #3
          Re: Jump broken led diode

          I bunch of led strips salvage from tvs.. How do i find out which ones are compatible with mine?

            Comment

            • dskall
              Badcaps Legend
              • Oct 2016
              • 2905
              • usa
              #4
              Re: Jump broken led diode

              You will need to apply a voltage across good one and see what voltage they are. Might want to watch video may help. https://www.youtube.com/watch?v=8otPjsN8jD8&t=548s
              I assume no responsibility for any stupid suggestions I might post.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Dvsr
                  On M-Audio AV40 active studio speaker's two zener diodes get really hot.
                  by Dvsr
                  Hi. I need help from wiser guys. I am amateur in electronics and can't figure this out by myself.
                  I bought faulty speakers, M-Audio AV40's. Other speaker has all the electronics in it and the other speaker is just passive one powered by the other speaker's amp. Original problem with the speakers was loud buzzing. I figured out that there is something wrong with the capacitors. I went ahead and replaced every electrolytic capacitor on the PCB. The caps are good quality and have the same values as the original ones.
                  After replacing the caps I started testing out the speaker. It seemed...
                  4 Photos
                  09-10-2025, 10:20 AM
                • debidoobs
                  Yamaha delay D1500, zener diode broken with no marking
                  by debidoobs
                  Hello,

                  im actually trying to save a d1500 delay from yamaha. I found the service manual but schematic is missing and BOM list is a bit unclear as components listed have no reference linked to the pcbs... In my case, one zener diode was broken (114 code on the pcb in attached file) and couldn't be repaired : it was a zener type package. In the BOM list i found 3 reference on this board : 1S555 (can be replaced by 1N4148), RD4.7EB2 (approx 5v rectifier), RD7.5EB3 (approx 7v rectifier)...

                  Actually the cathode goes to VCC of sram M5M5118P, without this diode missing, i have...
                  04-24-2024, 09:01 AM
                • magneh
                  Motorbike PCB - burned Diodes ( PJ78) - help to identify identical or equivalent
                  by magneh
                  Hello everyone

                  Got a motorbike PCB that had 3 burned diodes.

                  The smaller ones have the marking PJ78 GS1M
                  And one larger one PJ78 GEX

                  Can someone help me identify them so I can be able to replace with same or equivalent?
                  Photos attached

                  Apreciate !
                  Thank you...
                  05-19-2025, 07:38 AM
                • caspian
                  What Zener Diodes on a Linear Power Supply
                  by caspian
                  Dear members,

                  I have a linear variable power supply with unknown brand name that I used for voltage injection.
                  Then it failed. I discovered that its transistors (Q1 and Q2) are shorted.
                  In addition, I discovered that its zener diodes are defective.
                  I can replace the burned transistors.
                  But I do not know the model of the zener diodes. the model number is not marked on the zener diodes.
                  Therefore, I cannot replace the zener diodes.
                  I do not want to test the zener diodes in a test circuit to discover their model or value.
                  no schematics are available...
                  05-26-2025, 12:38 PM
                • tvguy12012012120
                  Zombie Samsung UN55NU6900F dead / no standby voltage - randomly came to life after hours of troubleshooting then died
                  by tvguy12012012120
                  This is my first attempt at troubleshooting a board like this, I know I could just buy a new board but I'm curious to figure out how this works. I've been testing different components in the evenings this week and I think the problem is with the IC failing to start up for some reason. When the board is plugged in there is no standby voltage.

                  Then today it randomly sprung to life like a zombie but shortly died thereafter. I have no idea why it would have done that and its the first time I've seen it running. I discharged capacitors on the board last night, then it was sitting today....
                  02-07-2025, 05:13 PM
                • Loading...
                • No more items.
                Working...