Pn60f5500afxza

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dehrhard
    New Member
    • Sep 2015
    • 5
    • USA

    #1

    Pn60f5500afxza

    Hey guys,

    Looking for boards for Samsung PN60F5500AFXZA.
    Normally buy from ShopJimmy, who is out of stock on all boards for this tv.
    Any recommendations for domestic parts sellers besides ebay?
  • martino
    Not so "senior"
    • Aug 2013
    • 997
    • canada

    #2
    Re: Pn60f5500afxza

    what board you looking for? BN.........
    Proud owner of dozens of broken TV's and many,many,many boards.


    Our website and passion:http://hollenhundshepherds.com/

    Comment

    • cliff_hootarski
      Badcaps Veteran
      • Jul 2006
      • 411
      • USA

      #3
      Re: Pn60f5500afxza

      http://www.ptselectronicsinc.com/sea...0AFXZA&Search=

      Usually have a 6mo. warranty on their boards.

      Comment

      • dehrhard
        New Member
        • Sep 2015
        • 5
        • USA

        #4
        Re: Pn60f5500afxza

        LJ92-01958A Y main
        LJ92-01962A Y buffer

        Having issues nailing down the issue with this tv... having similar problems as Truncatedhose had in his thread.

        Sorry about the late response...
        Last edited by dehrhard; 04-10-2017, 05:57 PM.

        Comment

        Related Topics

        Collapse

        • DXseekerMO
          Backlight strip quality, Amazon vs Ebay vs ShopJimmy. Is there really a difference?
          by DXseekerMO
          Hello everyone!

          Recently I've noticed that some ShopJimmy backlight strips don't have double-sided tape installed upon them when an application calls for it, and I must purchase the tape separately. In a recent chat conversation with a customer service agent I told them if this tape wasn't applied when it was called for I would begin to consider ordering my backlight strips elsewhere. It looks like this time may have come.

          I recently got a TCL 65S4 with bad backlights. After looking at the SJ listing here: https://www.shopjimmy.com/tcl-jl-d65...365as-m-led-ba...
          Yes
          0%
          1
          All backlight strips are the same quality
          0%
          1
          No
          0%
          0
          12-16-2021, 03:58 PM
        • caprider
          Recommendations of quality soldering station and (separate) hot air station
          by caprider
          Hey,

          I'm looking for some recommendations of a decent quality soldering station and a separate hot air station. I'm just a hobbyist, so even if (ultra)premium tools are not required, I still want some good tools. They should be available in Europe.

          I now have a TS100 and some soldering irons and looking for some better tools.

          1. Soldering station, budget around 200-240€
          JBC BT-2BWA seems to be a good product in the budget.

          2. Hot air station, budget around 200€
          Up to now I've found ATTEN ST-862D to be a good option....
          01-15-2022, 02:05 AM
        • slybunda
          ESR / LCR meter recommendations?
          by slybunda
          hi all, looking to expand my toolset, i have a multimeter that can check capacitance of capacitors but doesnt check esr. so im after a cheapo meter that can do the job without costing an arm and a leg for someone who only dabbles with electronics now and then. whats good option to go for thats..... cheap??
          01-02-2024, 05:16 PM
        • ratdude747
          Defective ShopJimmy LED Strips?
          by ratdude747
          Last summer I replaced the LED Strips in a Vizio E60-E3 4K TV and gave it to my parents. I bought the strips from ShopJimmy's Amazon store.

          Over the last couple months they started to have LEDs go out on it... until the other day where enough burnt out to make the TV unusable.

          Before we blow another $60 and I go to to the trouble of the repair again, is there a more reputable source for LED strips? Or did I just get a bad batch that just made it out of the warranty period?
          03-01-2022, 07:50 AM
        • AJ847.63e
          Need some recommendations for windows cloning.
          by AJ847.63e
          Hi All,

          Just wanted to get some advice on what people are using for backing up/ cloning their windows installs and programs?

          Two issues I'm looking to solve:

          1: I'm looking at setting up a NAS for us in the office so I can clone and backup the two systems we have here. It would be nice if I could setup automatic backups that run weekly say Friday after 5pm so if windows decides to be windows and kill itself, we've got something to fall back on.

          2: Cloning customer machines where needed. We're currently using AOMEI backuper but it is...
          10-31-2023, 06:00 PM
        • Loading...
        • No more items.
        Working...