Panasonic NV-DV2000ec

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tehmatix
    Senior Member
    • Nov 2012
    • 174
    • UK

    #1

    Panasonic NV-DV2000ec

    Hi forum,
    I have this device with error in service mode 3 17 03, which is mean
    ''S-Reel Lock'' ''S-Reel Lock has been detected during normal rotation'' ,
    S-Reel = SUPPLY REEL.

    ''2.2.3. Self- Diagnosis Mode
    This VTR has a Self-Diagnosis function, which detects troubles when undesirable condition occurred.When one of the following listed trouble is detected,
    Power is automatically turns off and its error is saved as the "Error-Code" in Timer microprocessor (IC7501).''

    Also don't work ''Rev'' and ''FF''. The tape is ok.

    Thanks
  • tehmatix
    Senior Member
    • Nov 2012
    • 174
    • UK

    #2
    Re: Panasonic NV-DV2000ec

    Hi forum,
    It was a mechanical issue.Pinch arm unit lock , very hard to move it. I cleaned all the dirty grease on the shaft and everything is working normally without any error : play/pause stop rev/ff.

    Comment

    Related Topics

    Collapse

    • EvazX
      ASUS ROG G513QY – RX 6800M powered but not detected intermittently + random crashes (Motherboard: 6050A3254002-MB-Axx)
      by EvazX
      Hello everyone,

      I am working on an ASUS ROG G513QY laptop with RX 6800M dGPU.
      Originally, this laptop was completely non-functional. I replaced the motherboard (part number 6050A3254002-MB-Axx), and with the replacement board it started working fine.

      For a long time, the dGPU worked perfectly stable. I played several hundred hours on very demanding games such as Cyberpunk 2077 without any crashes, instability, or detection issues. Performance was excellent and there were no warning signs of failure.

      However, after some time, the replacement motherboard...
      08-25-2025, 06:09 PM
    • Andre Gilbert
      Panasonic TC-P55ST50 8 blinks then no blinks
      by Andre Gilbert
      Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
      Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

      TV Model: Panasonic TC-P55ST50
      ...
      11-20-2024, 08:52 PM
    • AquaMan Ua
      Problem with PANASONIC CF53 laptop after changing BIOS settings
      by AquaMan Ua
      Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
      05-17-2025, 09:40 AM
    • spacez
      XPS 15 9520 - tpm device is not detected - NO ssd detected
      by spacez
      I have an XPS 15 9520 with a damaged bios so I flashed another one from badcaps. in manufacturing mode I changed the service tag but unfortunately ssd is not detected and also the error -tpm device is not detected- please help me. I haven't changed the tpm chip yet. Thanks in advance

      Service Tag: J2MSHW3

      |Express Service Code: 41518077843

      mother board LA-L402P REV 1.0(A00)​...
      08-18-2024, 10:54 PM
    • stecos
      Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
      by stecos
      Hi everyone!
      I happened several times, in the search for help from the web, to consult this very interesting forum.
      So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

      Having said that I come to the gist of my post on the forum as the title suggests.
      For my passion for technology I'm now collecting several...
      11-28-2022, 11:39 AM
    • Loading...
    • No more items.
    Working...