Samsung PS51D535 Plasma - Clicking - Impossible problem

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Hatmpatn
    Member
    • Mar 2017
    • 20
    • Sverige
    #21
    Re: Samsung PS51D535 Plasma - Clicking - Impossible problem

    What caused these transistors to short? Do I risk shorting out the new ones that I solder on?

      Comment

      • heavymachines
        Badcaps Legend
        • Mar 2011
        • 1028
        • United States
        #22
        Re: Samsung PS51D535 Plasma - Clicking - Impossible problem

        Heat and fatigue with age....

          Comment

          • Hatmpatn
            Member
            • Mar 2017
            • 20
            • Sverige
            #23
            Re: Samsung PS51D535 Plasma - Clicking - Impossible problem

            Ok, So I got a new X-SUS board. But this time with only 3 big capacitors on the left side and right side. But the numbers were the same. I had everything connected except the wide panel cables leading to the X-SUS connected and the TV(all the boards) started just fine. But when I connected the wide panel cables to the X-SUS it shorted again. So I guess my panel i shorted?

              Comment

              Previous 1 2 template Next

              Related Topics

              Collapse
              • Tynan Dill
                Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                by Tynan Dill
                I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                Upon bringing it home and plugging it up, it showed a standby light.

                I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                The screen seems to blackout and stay black, but with a flashlight I can see the display.

                With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                Assuming...
                ORIGINAL POWER SUPPLY BOARD
                7 Photos
                11-22-2024, 01:46 PM
              • m1ch43lzm
                HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                by m1ch43lzm
                Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                05-12-2025, 08:37 PM
              • howardc64
                TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                by howardc64
                All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                ...
                07-24-2025, 05:17 PM
              • slimmy182
                [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
                by slimmy182
                Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

                I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

                Looking on google I found this:...
                01-14-2023, 11:55 AM
              • stecos
                Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                by stecos
                Hi everyone!
                I happened several times, in the search for help from the web, to consult this very interesting forum.
                So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                Having said that I come to the gist of my post on the forum as the title suggests.
                For my passion for technology I'm now collecting several...
                11-28-2022, 11:39 AM
              • Loading...
              • No more items.
              Working...