OK where do I start ? And what would be the technical term for this anyway ?
Sony kdl-52v5100 Screen issue
Collapse
X
Related Topics
Collapse
-
by wizard13Hello everyone,
I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.
I have checked the forum and the available documentation but could not find a solution specific to my issue.- Brand & Model: Dynabook Satellite Pro C50D-B-100
- Part Number (P/N): PYU13E-00C00PFR
- Serial Number (S/N): 22028896H
- System Configuration (SC): A1PYU13E1127
- Motherboard Model: IP3_ACN16_MB_V21_20211222A
- Power Input: DC 19V –
-
Channel: BIOS Requests ONLY!
-
by Ryan.manHello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
by cloudyHi everybody
Since day one I'm having an unpleasant contrast/brightness issue on my Asus laptop.
Basically while watching movies, if subtitles appear on screen, the contrast or the brightness of the entire screen increases a lot (not sure if it'is brightness or contrast), disturbing the viewing of the movie.
Last year I replaced my screen because got damaged and this contrast/brigthness issue persists. It happens only on the laptop screen, in fact If i plug an external HDMI screen the issue does not occour on it.
It occours both on ubuntu and windows...01-01-2023, 05:12 PM -
by ScHAmPiHi all,
Because of two bright spots and a couple of dark spots I decided to replace the backlights in my Samsung UE48JU7000. See attached photos:
I thought all went well, but after full assembly and testing it out it turns out not all is fine. The backlights are completely fine but I have some weird issues on the right half of the screen. Since I didn't really touch the T-CON board (apart from taking out the ribbons of the display and reconnecting them on assembly) it would be weird that the issue is with the T-CON board... But based on the behavior of the service...2 Photos -
by jimbo-bobHi everyone,
I have a Sony bravia kdl 46nx700. It turns on, but the screen is awfully dim.
Things I have tried:
Went into settings and increased the brightness and contrast. Screen did not change at all.
Went into settings and made sure any auto brightness settings and limit is turned off. Did not see any difference again even after playing with brightness and contrast.
Did a factory reset. Again no change. Then repeated the steps above. No change.
At this point I think with myself that this is a hardware problem. Since my tv does not have any... - Loading...
- No more items.
Comment