Try
Eeprom dump thread!
Collapse
This is a sticky topic.
X
X
-
HI I am looking for the motherboard firmware 17MB97 VES480UNVS -2D-M05 panel thanks in advanceLeave a comment:
-
Hello, need dump for
hitachi 50hk6000
main board 17Mb130s
ic hk 25L1606e
thanksLeave a comment:
-
-
Hello,
Need dump for :
Technisat Techniline 40 Exlusive.
Panel: LTA400HL04
IC: 25Q32
ThanksLeave a comment:
-
Hello,
Need dump or usb update for :
Wonder: WDTV15804KCSM
Main: HK.T.RT2851P.839
Panel: CC580PV1D
EMMC: 8GB
Thanks
Leave a comment:
-
Attached FilesLeave a comment:
-
Hello to all.
Need dumps for:
Mitsai 24VLM13
Main: 17MB82-2
Panel: V236BJ1-LE1 rev.c2
ICs: U10: 25Q16DV | U12: 25Q64FV
Thanks
Leave a comment:
-
Hello,
Need dump for :
LG TV Model 50UP77026LB
Main LJ21 CHASSIS/EAX69487906(1.0)
Panel AC500DQG-SLPA3_RA
EMMC KLM8G1GETF-B041_IC8800
ThanksLeave a comment:
-
-
How yours is only 4.15MB and mine are twice that size once unzipped? (8Mb)Leave a comment:
-
I think we had a missunderstanding, I had the two files, but something had gone wrong when I edit my post to correct some speeling and the two files somewhat deleted themself, so here you go:
I dont know the difference between mine and yours throughtLeave a comment:
-
I Have two EEPROM files, both are from Haier 55'' 4K TV of the same model 55E5500U with the same main board T.MS3458.U801 but with differents Samsung panel.
Both have been tested and worked
Should fix the the infamous aging mode ( color rolling Red, Blue, White etc...), it did work on mine. I did use a brand new EEPROM though ( Digikey # GD25Q64CSIGR )
Even if they use the same board, both are not intercheageable ( I try ) something weird, on one, its says: 55E5500U panel:LSC550FN08 but have a sticker underneth saying LSC550FN08 and the other one list a Samsung panel LCS550FN05 but list a BOE panel HV550QUB-N81 on the sticker underneth, so who know?Attached FilesLeave a comment:
-
I Have two EEPROM files, both are from Haier 55'' 4K TV of the same model 55E5500U with the same main board T.MS3458.U801 but with differents Samsung panel.
Both have been tested and worked
Should fix the the infamous aging mode ( color rolling Red, Blue, White etc...), it did work on mine. I did use a brand new EEPROM though ( Digikey # GD25Q64CSIGR )
Even if they use the same board, both are not intercheageable ( I try ) something weird, on one, its says: 55E5500U panel:LSC550FN08 but have a sticker underneth saying LSC550FN08 and the other one list a Samsung panel LCS550FN05 but list a BOE panel HV550QUB-N81 on the sticker underneth, so who know?Last edited by max-power; 01-25-2025, 12:50 PM.Leave a comment:
-
Thanks, I tried now the led lights up, flashes 3 times and then turns off, I have to check the mosfets on the board, thanks for everythingLeave a comment:
Related Topics
Collapse
-
by (0)_(0)Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
by my2k2Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.-
Channel: Troubleshooting Audio Equipment
07-01-2024, 09:04 PM -
-
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....-
Channel: BIOS Requests ONLY!
-
-
by Ancient1Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... -
by jimhaHi ,
I'm looking for a dump to repair my screen
Thanks-
Channel: Troubleshooting Computer Displays
12-09-2024, 03:52 PM -
- Loading...
- No more items.
Leave a comment: