KDL-46XBR2 Completely Dead Need Training Manual

[rickcl]

Hello all, I am new here. Not new to electronics, I have been doing audio repair for about 20 years. Car amplifiers for about 10.
I have all the tools scope, meters, etc.

My Sony KDL46-XBR2 went out the other day. It does nothing. No led indicators and no startup.
Done: I did measure some DC voltages on the left 2 boards.
I did check (2) fuses on boards that I could find. Both ok.

I can troubleshoot audio pretty well. But this, without a method of operation, leaves me perplexed. Thank you all.
If anyone has any ideas or the Training Manual that would be great.
Thanks,

Rick

[dick_barton]

Re: KDL-46XBR2 Completely Dead Need Training Manual

Manual available for download from:-

[rickcl]

Re: KDL-46XBR2 Completely Dead Need Training Manual

Thanks Dick I should have mentioned I got the service manual. I should could use the training manual though.

[budm]

Re: KDL-46XBR2 Completely Dead Need Training Manual

[rickcl]

Re: KDL-46XBR2 Completely Dead Need Training Manual

Thanks Bud. I don't know how I missed that manual. I was just there. Wow Sony makes great manuals.

Rick

[rickcl]

Re: KDL-46XBR2 Completely Dead Need Training Manual ##Solved

Just to go on record, my problem was solved with a new G1 board.

Thanks Bud. I don't know how I missed that manual. I was just there. Wow Sony makes great manuals.

Rick

[budm]

Re: KDL-46XBR2 Completely Dead Need Training Manual

Thanks for the follow-up.