Hello guys i have here LG 32LB75...
PSU is YP32DVR ===> P/N: EAY43596801 rev. 1.0
It has a blown 250v 5a fuse marked in the picture... and previously changed by someone else caps that are again blown also marked in the picture... Update: there are signs of post production soldering on resistors R253 and r254 also located near blown caps.
I dont have original values of blown caps... and what should i also check before I replace all of this... if it will work at all.
PSU is YP32DVR ===> P/N: EAY43596801 rev. 1.0
It has a blown 250v 5a fuse marked in the picture... and previously changed by someone else caps that are again blown also marked in the picture... Update: there are signs of post production soldering on resistors R253 and r254 also located near blown caps.
I dont have original values of blown caps... and what should i also check before I replace all of this... if it will work at all.
Comment