Polaroid LE-32GCL firmware needed!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • steviewonder
    Senior Member
    • Dec 2013
    • 183
    • england
    #1

    Polaroid LE-32GCL firmware needed!

    Just wondering if anyone has a dump,or usb file for this parcel?...
    mainboard is one of those horrible mutant affairs, TP.SIS231.P83.
    I have tried various files from the net,none seem to work properly.
    Maybe someone has the dump of files they could kindly supply?
    best wishes,
    steve
    Tags: None
    • bikerbuddy
      Senior Member
      • Jun 2011
      • 134
      • USA
      #2
      Re: Polaroid LE-32GCL firmware needed!

      Many times over I would remove the eeprom from the main Board and see if I can get a read from it ,If you do then get your self a new eeprom and do a write on it and place it back on the board and see how it work.
      good luck. I have done it before .

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Daniel Larsson
          Firmware file for LG SK10Y Soundbar stuck in Please wait loop needed
          by Daniel Larsson
          Hi,

          My LG Soundbar, SK10Y, has somehow ended up in an endless "PLEASE WAIT" loop and I am now starting to suspect that the firmware is causing this, and I can't manage to connect via the app to push a new firmware in as it never really starts.


          I can trick it to start via HDMI ARC and it actually starts up, flashes OPTICAL and then goes to ARC where the sound (including sub) is perfect, but the white led indicator keeps blinking and after 20 seconds it says "GOOD BYE" and shuts down.
          During these seconds the function button is not working...
          2 Photos
          08-13-2025, 10:29 AM
        • EduCabral
          [Help Needed] Yatour YT-M06 (Pioneer 1) ā€“ Firmware or Schematic Request
          by EduCabral
          Hi everyone,

          I'm currently working on reviving a Yatour YT-M06 CD Changer Emulator module for use with a Pioneer 1 interface (specifically with a DEH-P5950IB head unit).

          While the unit is recognized as a CD changer, none of the USB, SD, or AUX features respond, which leads me to believe the firmware may be corrupted or incompatible.

          šŸ”§ Details:
          • Model: YT-M06
          • Interface: Pioneer 1
          • MCU: Fujitsu MB89F202
          • Goal: Find a valid .bin firmware file or memory dump from a working unit

          I'm happy to attempt flashing, analyzing memory dumps, or doing hardware-level...
          07-15-2025, 12:26 AM
        • Daniel Larsson
          Firmware file for Marantz NR1501 needed
          by Daniel Larsson
          Hi all,

          I picked up a Marantz NR1501 that the seller said did not produce any audio, but was starting up just like normal. This was indeed the case and the hunt for damaged components started.
          After confirming all voltages and replacing all caps on this godforsaken HDMI-board I finally got sound from the AUX input, but all digital inputs are still dead.

          The service menu shows no DSP version so I desoldered IC1604 that should have the serial flash DSP firmware on it and made two dumps that turned out identical.
          The content of these seems to be useless as far...
          05-23-2025, 04:11 AM
        • jorpec
          Dump/Firmware needed TV Kunft 19CG86813 Board T.EME380.61 Panel ECG185BB-LC4
          by jorpec
          Hi, all

          I need the dump/firmware for this tv, it was on a boot loop, i dont have the original corrupted dump because i used a pen drive with a firmware that solved the boot loop, initially it seemed it was ok but the tv has no sound

          Thanks
          10-17-2025, 03:51 AM
        • Robby-Gr
          TV Samsung UE55HU8500L (2014) ā€“ service menu + firmware reflashing advice needed
          by Robby-Gr
          Hi all,

          Iā€™m trying to recover a Samsung UE55HU8500L (curved UHD, 4K model from 2014) after replacing the panel. The new panel is a 55A1UU8EH, which produces excellent image quality ā€” very close to the original.

          However, since the swap, the TV enters a boot loop (Samsung logo ā†’ restart) unless I enter the service menu and perform a reset.

          The service mode had been previously modified ā€” possibly by a technician or during the panel swap ā€” and I suspect some key settings are mismatched for the European (Greece) market.

          Additional issues:...
          11 Photos
          09-27-2025, 12:02 AM
        • Loading...
        • No more items.
        Working...