Vizio e320ar & LG 32LC50C

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MsDymond
    New Member
    • Aug 2016
    • 5
    • united states
    #1

    Vizio e320ar & LG 32LC50C

    TV # 1 - Vizio e320ar

    TV was working fine. Last night I was hooking up a ps3 to the tv, with the HDMI cord. Turned the Ps3 on, and 2 minutes later the TV screen went out. I unplugged the TV from the outlit, held the power down a few minutes. Plugged it back into the wall, and tried turning it on. The light is a solid white light, no audio or video. I can NOT manually turn it on or with the remote control. My son said he tried turning it on and it was making a clicking sound. There was no power outage or anything.


    TV # 2 - LG 32LC50C

    After the mishap of TV #1. We brought the other TV from the living room into my room. My grand child was trying to help and used a "baby wipe" to clean the screen. After mid-way through a movie, my grand child came in and said something was wrong with the TV. Now this TV has a brown spot on the screen


    I do not know anything about electronics. Besides turning them off and on.
    Tags: None
    • MsDymond
      New Member
      • Aug 2016
      • 5
      • united states
      #2
      Re: Vizio e320ar & LG 32LC50C

      Hello. Any suggestions?

        Comment

        • dick_barton
          Badcaps Legend
          • Aug 2015
          • 6643
          • Wales
          #3
          Re: Vizio e320ar & LG 32LC50C

          Can you post pictures of the screen TV2
          Willing to help but I'm no expert.

            Comment

            • MsDymond
              New Member
              • Aug 2016
              • 5
              • united states
              #4
              Re: Vizio e320ar & LG 32LC50C

              Originally posted by dick_barton
              Can you post pictures of the screen TV2
              Hello TV2

              This is a screen shot of the TV from PS4. As you see, you don't see it.


              I took a picture with my cellphone camera, and you see it.


                Comment

                • ReeceyBurger123
                  Never Give Up !
                  • May 2014
                  • 7325
                  • Britain
                  #5
                  Re: Vizio e320ar & LG 32LC50C

                  Looks like he might of pushed that hard and caved the backlight diffuser in a little or even worse damaged the lcd foils. Take it back say it has shadows on it would be the best bet.
                  Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                  https://www.facebook.com/Telford-Tel...7894576335359/

                    Comment

                    • MsDymond
                      New Member
                      • Aug 2016
                      • 5
                      • united states
                      #6
                      Re: Vizio e320ar & LG 32LC50C

                      I can't take TV2 back, it is over 2 years old. My son said he seen a video where they took the panel off and cleaned it off and it was fine. Could that be done?

                      And what about TV1, anyone have any suggestions?

                        Comment

                        • dick_barton
                          Badcaps Legend
                          • Aug 2015
                          • 6643
                          • Wales
                          #7
                          Re: Vizio e320ar & LG 32LC50C

                          I have seen posts where they have cleaned the panels but that has been because of dirt, dust or heavy smoking.

                          The picture appears to be displaying the "Mura" effect which you can google for further information.

                          It is possible that there has been slight pressure on the panel over time which has caused this problem.

                          I am not aware of anyone successfully stripping down the panel and rebuilding to clear the fault.

                          If you do find a solution then please share with us.
                          Willing to help but I'm no expert.

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • SS454
                              vizio e650i-a2 backlight flashes then turns off
                              by SS454
                              vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.

                              panel: au optronics T650HVN05.4
                              72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
                              link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1

                              Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
                              https://www.shopjimmy.com/vizio-56-0...-power-supply/

                              Vizio 55.75J01.001G (91.75J10.004G) Main Board...
                              08-20-2020, 03:57 PM
                            • pedromvu
                              Vizio M65-E0 not turning on
                              by pedromvu
                              Hi, I know these TVs are common to have problems like this, but unfortunately I was not able to find repair guide for this specific model or for something with this kind of power board.

                              The thing is this doesn't have the 5vsb pin which is used to determine from which board the issue comes.

                              Everything in power and main board was inspected without any apparent problems, but haven't measured everything.

                              The voltages from Power to Main board are as follows:

                              NC = 0
                              A = 0
                              BL_on/off = (Some millivolts, probably considered 0)...
                              11-18-2022, 12:28 PM
                            • howardc64
                              Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
                              by howardc64
                              Failure Symptom



                              No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

                              Where is the short?

                              Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



                              Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
                              05-27-2025, 02:56 PM
                            • Tynan Dill
                              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                              by Tynan Dill
                              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                              Upon bringing it home and plugging it up, it showed a standby light.

                              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                              The screen seems to blackout and stay black, but with a flashlight I can see the display.

                              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                              Assuming...
                              ORIGINAL POWER SUPPLY BOARD
                              7 Photos
                              11-22-2024, 01:46 PM
                            • howardc64
                              Vizio SmartCast TV software bug that looks like hardware
                              by howardc64
                              Bug looks like hardware so thought I posted it here. Exact same behavior on 2 different model 4K Vizio TVs running their SmartCast smarttv software. After launching youtube app, press vizio button on remote to return to the smarttv menu, once in awhile, a column of bad pixels will show for few seconds on the left hand side.



                              It seems the vizio software is reinitializing hardware when returning to the smarttv menu. In general, SmartCast software isn't very good. Also will randomly (relatively infrequent) get no network connection when on wifi and require reboot....
                              11-16-2024, 05:17 PM
                            • Loading...
                            • No more items.
                            Working...