LTY460HF07 vs LTY460HF03

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jczarniak
    Senior Member
    • Oct 2015
    • 179
    • UK

    #1

    LTY460HF07 vs LTY460HF03

    Hi,
    I've got SONY KDL-46W5810 fitted with LTY460HF07, faulty t-con board.
    I found t-con board for KDL-46WE5, screen LTY460HF03.
    Will that board working with my screen, please?
    Thank you.
  • flocko
    Badcaps Legend
    • Nov 2012
    • 1121
    • uk

    #2
    Re: LTY460HF07 vs LTY460HF03

    the part numbers for T.Cons to match your panel (LTY460HF07)would be LJ94-02937H or 46NN-MB4C4LV0.7 Hope this is of help in tracking down a replacement Flocko

    Comment

    Related Topics

    Collapse

    • m1ch43lzm
      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
      by m1ch43lzm
      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
      05-12-2025, 08:37 PM
    • advant
      Driving a Sharp TCON/panel with a universal main board
      by advant
      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
      02-03-2020, 12:25 AM
    • howardc64
      A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
      by howardc64
      Problem

      This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
      08-04-2024, 10:36 PM
    • maxim2511
      LG 55EC930V OLED - swich on swich of no screen
      by maxim2511
      My Oled Tv is 55inch tv, 3 days ago I notice that middle of the screen is getting warmer and on picture I have ghosting, missing red color. Color red was still displaying, but it was not so strong as corners of the screen and watching some movies makes me angry.
      Then I get an idea to take it apart and clean boards from dust.
      In side of Tv was not so bad, I take compressed air in can, and gently blow up.

      Also I was thinking to styrofoam sponge to isolate power board from screen that the middle of the screen will not worm so much. Because Led on screen when gets higher...
      05-14-2021, 02:21 AM
    • kca
      LG 82UN8570AUD ~ TCON or PANEL?
      by kca
      Hello all ~

      Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

      When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

      I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
      08-31-2025, 06:38 AM
    • Loading...
    • No more items.
    Working...