Panasonic Th-42pz700u 7 blinks.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Malachi
    Badcaps Legend
    • Dec 2015
    • 1077
    • Usa

    #1

    Panasonic Th-42pz700u 7 blinks.

    I picked this tv up today with the 7 blink fault.
    The sc board is TNPA4250. When I disconnect SC2 I still get 7 blinks.
    Connect SC2, disconnect the 2 buffers, 7 blinks.
    I check the 2N5307 transistors on the SC board and 6 of them read shorted (meter beeps).
    They ones that seem shorted are the top 5 on the left.

    Does this sound like a bad SC board?

    Service manual says 7 blinks could be SC, SU, SD or D board.
    Both of the board LEDs for the SC and the SS are lit, which on other Panasonic models usually indicate they are ok.
    Any advice?

    The picture should be rotated 90 degrees clockwise.
    Attached Files
  • Malachi
    Badcaps Legend
    • Dec 2015
    • 1077
    • Usa

    #2
    Re: Panasonic Th-42pz700u 7 blinks.

    Forgot to say, I get about 4.7MOhm on sc2.

    Comment

    • rldev
      Member
      • Aug 2016
      • 11
      • US

      #3
      Re: Panasonic Th-42pz700u 7 blinks.

      Do the 2013 models have leds on the boards? I'm having a similar problem, but i don't see any leds on the board.

      Comment

      • Malachi
        Badcaps Legend
        • Dec 2015
        • 1077
        • Usa

        #4
        Re: Panasonic Th-42pz700u 7 blinks.

        I don't know.

        Comment

        • alexeilb89
          Member
          • Jul 2016
          • 10
          • United States

          #5
          Re: Panasonic Th-42pz700u 7 blinks.

          Originally posted by Malachi
          I don't know.
          How did you test the transistors? I believe those are MOSFETs not sure if you can test them with just a multimeter. I tried by placing negative probe on Emulator and Positive to Gate (apparently any reading would mean its faulty) could someone here please explain a way to test these MOSFETs with a just a multimeter?
          Last edited by alexeilb89; 08-04-2016, 10:45 PM.

          Comment

          • chrismurphy
            Badcaps Veteran
            • May 2014
            • 251
            • australia

            #6
            Re: Panasonic Th-42pz700u 7 blinks.

            Originally posted by alexeilb89
            How did you test the transistors? I believe those are MOSFETs not sure if you can test them with just a multimeter. I tried by placing negative probe on Emulator and Positive to Gate (apparently any reading would mean its faulty) could someone here please explain a way to test these MOSFETs with a just a multimeter?
            MOSFETS dont usually go open ,almost always short look for short between source to drain
            Last edited by chrismurphy; 08-05-2016, 12:26 AM. Reason: added info

            Comment

            Related Topics

            Collapse

            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • sam_sam_sam
              Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
              by sam_sam_sam
              I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

              This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

              After all of...
              07-13-2024, 08:14 PM
            • canadaboy25
              Panasonic TC-P54VT25 No image. A or D board?
              by canadaboy25
              I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

              The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

              I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
              01-17-2021, 01:06 AM
            • Biruslapio
              Panasonic P50VT20B Plasma 12 Blinks, Power Supply or A-Board?
              by Biruslapio
              Hello, I've had this TV for 3 years, 2 years ago it stopped working signaling 12 Blinks, SOUND_SOS according to the service manual.

              It has no VSUS or VDAT, and P15V has 1.0V instead, the same 15V goes to A board. F15V is ok and other main voltage rails.

              It seems the power supply is defective, since unplugging D20 ribbon cable that goes from D-board to SC-board makes the behavior change, the TV stays on, there's no image nor VSUS, but 15V reads 2.4V, high enough to not trip the SOS 12 blinks, so it stays on, fans do not spin but I left it 2 hours, green led lit up...
              02-16-2021, 09:44 PM
            • Loading...
            • No more items.
            Working...