Re: Panasonic TGP55VT30 with 8 blinks
Dumb question: if I jumper the S50 connector will the board revert to a BA?
Dumb question: if I jumper the S50 connector will the board revert to a BA?
-
-
Re: Panasonic TGP55VT30 with 8 blinks
You are correct with the first two words.
PTS is a good choice for rebuilds, you may want to send an email with an explanation and some images of what you've done and what is wrong with the board now.
you mentioned a bad connector?
Most places won't touch anything messed with by the untrained but they may take it on. You don't know if you don't ask.
Will they take the old board back and how much will you loose in freight and time?Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Why not repair the board yourself? You probably only need the IGBT's that are short and need to put the capacitors back in the board.I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
I think I will attempt to repair the old board. More questions on that later. I will also try to return the BG board. The shipping was about $25 so I could get a big chunk back if they take it, even if there is a "restocking" fee. It had a 90 day warranty so if they can verify it's still good it seems they would have to take it back.Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Does anyone not recommend the 5335 repair kit from PTS?Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Do you intend to keep the set? I've ordered several items from them, never been dis-satisfied. For $95 you get the 5335BA, but for $175, you get every board! Doubtful they would attempt repair on your board, besides it's the same cost either way.
http://www.ptselectronicsinc.com/txn...or-tnpa5335bk/Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
cliff, thanks for the link. I looked there yesterday but it said they were out of stock.Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Actually it was Shop Jimmy that was out of stock.Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Cliff: To answer your previous question, yes, I intend to keep the TV. I saw the $175 for every board at PTS but I'm not sure I need that (yet).Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Present status: The seller agreed to take my BG board back and send me a BA. I need to pay round trip shipping (to Hong Kong!) but I think that is a lower cost versus returning the BG board for a refund (plus shipping to Hong Kong) and buying a new board somewhere else.In the mean time I may buy a repair kit for my original BA board that I've cut some caps off of.Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Hope you get it working again! You probably only need to replace the 6 IGBT's.I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
I did mention Much earlier--
Why not convert that working board to suit the set instead of all this messing round!TELEFIX
How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
http://www.irf.com/technical-info/appnotes/an-1088.pdf
PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Guess what, FEDEX estimate to ship the board back to Hong Kong is $130!! (DHL charged $35 from HK to CA.) Guess I'll buy that BA board from PTS for $95 after all. Anyone need a TNPA5335BG board?Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
I also ordered a TNPA5335BA repair kit from Shop Jimmy for $25, but I think I need a better soldering iron.Comment
-
Re: Panasonic TGP55VT30 with 8 blinks
Not that anyone seems to care anymore, but I received a TNPA5335BA board from PTS and installed it. TV works now. I think "utee" had the same problem I did, wrong board (BG Vs. BA).Comment
-
-
Re: Panasonic TGP55VT30 with 8 blinks
I sold my BG board on eBay for $90. At least I got some of my original expense back. And like you said learned a good lesson. Thanks for the help.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow
This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board
After all of... -
Hello, I've had this TV for 3 years, 2 years ago it stopped working signaling 12 Blinks, SOUND_SOS according to the service manual.
It has no VSUS or VDAT, and P15V has 1.0V instead, the same 15V goes to A board. F15V is ok and other main voltage rails.
It seems the power supply is defective, since unplugging D20 ribbon cable that goes from D-board to SC-board makes the behavior change, the TV stays on, there's no image nor VSUS, but 15V reads 2.4V, high enough to not trip the SOS 12 blinks, so it stays on, fans do not spin but I left it 2 hours, green led lit up... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
Comment