Sharp PN-E702

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Peter 101
    New Member
    • May 2016
    • 3
    • wales

    #1

    Sharp PN-E702

    Good Morning,
    We have a Sharp PN-E702 that loses backlight after 20 seconds. We are trying to rule out wheather its the display or the supply. On the 14 separate supplies we have about 180v supplying the screen. On the return from the screen we only have between 1v and 1.7v. After disconnecting the return voltage on the 14 separate pins the voltages range between 70v and 90v. Any help would be much appreciated.

    Best Regards Peter
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain

    #2
    Re: Sharp PN-E702

    Sounds like a bad Led in the screen to me. You will have to take the Lcd panel apart and test the Led backlights.
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment

    • CapLeaker
      Leaking Member
      • Dec 2014
      • 7973
      • Canada

      #3
      Re: Sharp PN-E702

      x2 what reecey said.

      Comment

      • Peter 101
        New Member
        • May 2016
        • 3
        • wales

        #4
        Re: Sharp PN-E702

        Thats what we were thinking as well,,unfortunately due to the size of this beast its a real pain to do without risking cracking the screen.

        Comment

        Related Topics

        Collapse

        • Sus256
          HISENSE 65E7KQ PRO - no boot
          by Sus256
          Hi all!

          HISENSE 65E7KQ PRO
          RSAG7.820.13512 - chassis
          MT9618BAATAB - cpu
          RSAG7.820.12059 - power
          HD650Y3U77 - panel
          KLM8G1GETF - emmc

          The TV does not turn on, the standby indicator is on. All voltages are present.
          Emms is dead. Not readable, not detected.
          Replaced emmc.
          But with another dump there is no launch

          Terminal log

          UART
          <
          AC_ON
          RPMB key is not yet programmed

          HASH1_VERSION=0x00000000 64bit
          E-B
          FDE enabled
          layout pattern onebin by SAR7,0...
          06-01-2025, 02:11 AM
        • neilc6
          Sold Sharp LC-50LB370U Board on Ebay - Return Requested
          by neilc6
          Sold this board on ebay with this warning in the description and pic of working TV.

          "Pulled from a TV with a damaged panel. NO REFUNDS.
          This model suffers from LED backlight failures. Make sure your backlights are working before replacing boards. Symptom is TV turns on and off with no backlight or a flash of backlights."

          Ebay Return Request
          Reason for return - Doesn't work or defective
          Details - Powersupply board has sound,but verry dark screen.I would like to return,You send for me another one. Thank You.

          With ebay, if...
          07-16-2021, 04:00 PM
        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • sefoster
          Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
          by sefoster
          I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
          11-20-2022, 09:29 AM
        • SONY_E-WASTER
          Help! Sharp LC-70UE30U 3 long flashes + 3 short flashes.
          by SONY_E-WASTER
          Hello, I'm new to this forum. I like to tinker with Sony electronics, I have been lucky trouble shooting sony stuff, But I can't find much info on this Sharp TV.

          The problem; plug to power>white led power indicator light is on>it turns on to the red Sharp logo>
          then the android logo is displayed, lit fine then the android logo brightness varies, then lit normal, then the tv restarts and does the same startup logos over and over for 5 times then it turns off and the power indicator light flashes the trouble code 3 long blinks plus 3 short blinks .

          does...
          12-26-2021, 05:46 PM
        • Loading...
        • No more items.
        Working...