Lg 50pa4500

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bjorkson
    Senior Member
    • Apr 2012
    • 127
    • USA

    #1

    Lg 50pa4500

    Hello, trying to do a test pattern on my LG Plasma TV, since I am getting a rainbow color screen on my TV. VA/VS tested good when power on. I have this logic control board, can't find my Auto GEN to jump it. Anyone know? This is the logic board I have.
    Attached Files
  • bjorkson
    Senior Member
    • Apr 2012
    • 127
    • USA

    #2
    Re: Lg 50pa4500

    Can anyone assist please? Control board number is EBR 75271801. Thanks.

    Comment

    • mmartell
      Badcaps Legend
      • Oct 2013
      • 3189
      • Canada

      #3
      Re: Lg 50pa4500

      At the risk of answering incorrectly I think it's the pad in the small square just between/above the two connectors along the bottom of the board. I think you have to ground it.

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: Lg 50pa4500

        Jumper these two pads next to R452 and R451 and remove Lvds to run the PDP test patterns.
        Last edited by ReeceyBurger123; 05-17-2016, 03:44 AM.
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • bjorkson
          Senior Member
          • Apr 2012
          • 127
          • USA

          #5
          Re: Lg 50pa4500

          Got it, ran the test and test pattern came out like it should, looks like I have a bad main board, will order one and let you guys know if that fixes the problem. Thank you for the assistance.

          Comment

          • ReeceyBurger123
            Never Give Up !
            • May 2014
            • 7325
            • Britain

            #6
            Re: Lg 50pa4500

            Ok cool, what pins was it to run Tp on these ?
            Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

            https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • bjorkson
              Senior Member
              • Apr 2012
              • 127
              • USA

              #7
              Re: Lg 50pa4500

              It's not label, but the pins below R451 and above R452.

              Comment

              • ReeceyBurger123
                Never Give Up !
                • May 2014
                • 7325
                • Britain

                #8
                Re: Lg 50pa4500

                Ok as I said cool, let us know what happens when you replace the Mb.
                Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                https://www.facebook.com/Telford-Tel...7894576335359/

                Comment

                • bjorkson
                  Senior Member
                  • Apr 2012
                  • 127
                  • USA

                  #9
                  Re: Lg 50pa4500

                  Just wanted to give you guys a update. Main Board came in yesterday, looks to be a good main board I received. TV is up and running like a champ! Thank you guys for all the help!.

                  Comment

                  • vinceroger69
                    Badcaps Legend
                    • Mar 2012
                    • 6714
                    • uk

                    #10
                    Re: Lg 50pa4500

                    Thanks for updating the fix im sure it will help others out too.

                    Comment

                    Related Topics

                    Collapse

                    • Yanleb
                      LG 60PK550 Logic Control Board EBR63450301
                      by Yanleb
                      Hi all, I just want to share the repair of my 60PK550-UA TV set.

                      The TV set was powering on, just no image. After verification, nothing wrong on the YSus or ZSus boards. Nothing wrong on the main board either.

                      But I noticed that the LED was not flashing on the Logic Control Board. This is an EBR63450301. The LED is supposed to flash even with all the flat cables disconnected, with only the power cable attached.

                      All the voltages measured at the electrolytic capacitors on the board were good. From top left to bottom right:
                      C57: 3.30V
                      C61:...
                      07-20-2023, 12:38 AM
                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      11-22-2024, 01:46 PM
                    • m1ch43lzm
                      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                      by m1ch43lzm
                      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                      05-12-2025, 08:37 PM
                    • ohren
                      Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
                      by ohren
                      I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

                      I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

                      The models launched in 2018 and 2019 respectively....
                      09-08-2023, 05:24 PM
                    • korben_dallas
                      Will I have a bricked logic board after reflow of the GPU v-core U8900 chip on my Mid-2012 15" Retina Macbook pro?
                      by korben_dallas
                      Hi everyone! I'm trying to fix my black screen / failed U8900 GPU v-core on my Mid-2012 Macbook Pro 15" Retinaby doing a rework/reflow of the chip (once I determine that's the real issue; but it likely is).

                      I've been disabling the GPU in NVRAM for a few years... but it's just time for a better solution.

                      I'm new to soldering but the only feasible way to fix this issue is to do something myself.

                      MY QUESTION:
                      I've been seeing some people (on this forum mostly) run into issues with the logic board needing a serial number or it being deactivated (?)...
                      02-14-2024, 12:23 AM
                    • Loading...
                    • No more items.
                    Working...