Re: eax64905001 No Pfc Help ?
certainly no minimum order just placed one now that came to less than £3.00 so all good on that particular order of led ics you have to order 5 which isnt a bad thing i guess as its the same for capacitors etc.
eax64905001 No Pfc Help ?
Collapse
X
-
Re: eax64905001 No Pfc Help ?
I didn't read all the details but I did read that web based orders were free delivery but I didn't see if there was a minimum order attached to it.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Have you got a Radiospares Depot (RS) anywhere near you.
They do say online orders free delivery
http://uk.rs-online.com/web/c/displa...rchTerm=mp3202Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Have you got a Radiospares Depot (RS) anywhere near you.
They do say online orders free delivery
http://uk.rs-online.com/web/c/displa...rchTerm=mp3202Last edited by dick_barton; 03-15-2017, 08:55 AM.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
mouser is ok ordered from them before but postage is £12.00 so for small orders makes it very expensive china ordered stuff postage wise is taking roughly 3 weeks at the minute so not too bad if customer will wait etcLeave a comment:
-
Re: eax64905001 No Pfc Help ?
Mouser is my go to for bulks but I just need one. Oh well, china it is.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Never ordered from them but they have them listed.
http://www.mouser.co.uk/Search/Refin...Keyword=MP3202Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Try going onto the main forum then go to Troubleshooting TVs and Video Sources then at the top start new thread is in blue click that the only reason why were saying it is a lot of people search by tv models numbers so whilst were helping you fix your set it may help others as wellLeave a comment:
-
Re: eax64905001 No Pfc Help ?
But you are asking about the T-CON so at least post good clear pictures of the T-CON for now, same power supply can be used for more than one model.
I am surprised that you cannot start a new thread since you already posted 6 replies.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
I posted in this thread for 2 reasons.
1. New users can't start threads.
2. My TV has the same power board as the OP.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Start new thread with good, clear, and well focused pictures will help.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
maybe best to start a new thread in the tv section with tv model number etc post what you have checked already and post some clear pictures of the tv include one showing how all the boards are connectedLeave a comment:
-
Re: eax64905001 No Pfc Help ?
I tested all the regular test points on the t-con board and they were fine. I checked the t-con fuse for continuity although I'm not sure if I actually checked for 12V.
I can do a quick check and then upload a photo if you think it will help.Leave a comment:
-
-
Re: eax64905001 No Pfc Help ?
It's an LG 32LN 540B. Backlights are fine and so is audio, just no video.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
so the set has nothing on the screen no backlights flash when you first turn it on?Last edited by vinceroger69; 02-21-2017, 02:04 PM.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Any thoughts on how I can check if it is the tcon board that is faulty, or the video board?Leave a comment:
-
Re: eax64905001 No Pfc Help ?
We just left it switched off for a few days before stripping it down. No moisture inside.Leave a comment:
-
Re: eax64905001 No Pfc Help ?
Did you dry up all the moisture? Blow some hot air in the spill area with a blower for a couple minutes and retry a start-up.Leave a comment:
Related Topics
Collapse
-
by PipolupsHi there !
I'm having an issue for several weeks with my quite old K70 LUX RGB keyboard. I haven't used it for few months, and once I setup up again my desktop computer, I got several dead LEDs on that keyboard. I tried the Corsair troubleshooting thing (disabling options in iCUE, ...) but nothing changed so I conclude that for some reason some LEDs went in retirement...😅
Decision taken to change these LEDs as I have access to desoldering iron and binocular magnifier, I wrote a ticket to tech support, hopping to obtain the LEDs reference and... They refused to tell me 🙄...10-08-2024, 11:58 AM -
by THE GTCSo I use this TV daily as a second monitor for my PC or my Playstation - at one point a few months back I tried to fix the problem - but in the process, I figured out something that works so I haven't posted this for awhile. It is an annoying trick to have to do though, so I decided to post about it to see if anyone could spot what's wrong. It baffles me because it works on it's own half the time.
When I first got this TV, I was told it wouldn't turn on, and of course I did the flashlight test, and the image was there. Also, the red LED on the front indicated that it had power (it... -
Hi all,
I have what should be a simple job but is causing me issues. There are three LEDs (yellow, green and red) on the indicator panel of a solar PWM controller and these have broken off. I need to replace them but I am unsure of the voltage drop across these. I don't want to replace with random LEDs in case they blow.
I took one of the LEDs out of circuit, put 19V across it with a 500 ohm resistor in series and there is a drop of about 13V across the LED, and this seems to increase as I increase the input voltage.
I thought I could just put a resistor...-
Channel: General Capacitor Questions & Issues
-
-
by jimbofzi have replaced many leds strips that have changed blue when they are worn
and the new replacements are perfect white
but when fault finding do quantum leds always look blue? -
by Quantum ICHello everyone
I'm new to LED strip LED replacement.
The original LED comes with a single internal LED or chip. I only get at the moment LEDs with two internal LEDs or chips.
I understand that this is due to the tone of the light they emit.
My Doubt is:
Can I use the LED with two internal chips without problem?
Will there be much difference in the picture?
I'm going to replace all the LEDs.
Both LEDs (original and replacement) are 3V and the same size....03-04-2022, 04:03 PM - Loading...
- No more items.
Leave a comment: