Olevia 65" LCD no longer working

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Craig234
    New Member
    • Apr 2016
    • 2
    • US
    #1

    Olevia 65" LCD no longer working

    Hello, I was directed to this site - not sure what I'm asking for, but any useful comments are welcome.

    The set is 8 years old. For a couple days, it would get one or more loud pops from the speaker and the sound would shut off while watching TV until I turned it off and on. Then, it totally broke. When I turn it on, for about 1 second the brand logo is displayed - but the third left of the screen is darker - and then the screen goes black.

    I called a TV repairman and without seeing it he suggested a new board, parts $100-$150 and labor $100.

    I'm deciding what to do, repair or replace, tempted to repair as I was happy with it, it's cheaper, and avoids a hassle.
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: Olevia 65" LCD no longer working

      Start with model number and good clear pictures of the whole back side of the TV so we can see all the boards will be a good start.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        Previous template Next

        Related Topics

        Collapse
        • MMH3
          Dell Optiplex 5050 SFF - strange behavior and service_mode jumper not working anymore
          by MMH3
          Hello,

          i have many 5050sff. all of them, and how i experienced over many years for all about 250 DELLs goin through my hands, are fully flashable and can be serviced in any way when the service_mode jumper is set.
          Never ever i experienced problems with that.

          Now i have one 5050sff machine, where this jumper isnt working at all.
          I do not get the normal messge that the jumper is set when booting and a short test with FPT just confirms this. Everything is locked -->> EVEN for reading !?

          The history of the machine is that i used it in my office...
          03-23-2025, 09:28 PM
        • DynaxSC
          GIGABYTE X299 AORUS ULTRA GAMING - SATA PORTS 4-7 NOT WORKING ???
          by DynaxSC
          Hi,

          I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
          There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
          The board is generally working now, all PCIe ports are working, Windows installs normally.

          However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
          The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA...
          03-10-2025, 12:27 PM
        • obelix24
          Macbook Air 2020 (a2179) - touch id not working
          by obelix24
          Hi i have one Macbook Air 2020 where touch ID is not working (it's not scanning fingerprints). Touch ID was working before, there is no error message during scanning fingerprint it's just not scanning on screen you can see only fingerprint but there are no red updates as when it's working. Power button is working fine.

          I've checked boardview and also schematics but i'm not able to find anything related to TouchID ... i have similar issue on a2338 where there was problem with PP3V0_TOUCHID​ and after replacing UT610 it was working but here i'm not able to find anything related to...
          02-09-2025, 12:57 PM
        • hopkok
          Lenovo Legion 16ITHg6 NM-D721, keyboard not working, LEDs too
          by hopkok
          Hi masters, I need your help.

          I am working on Lenovo Legion 16ITHg6
          Motherboard number NM-D721, no BV, no schematic but I am attaching very closes ones.

          INPORTANT: My motherboard version is with IT8258 IC, that is controlling keyboard and RGB LEDs.

          My problem is on UI142, +3VALW_AG is not stable, floating from 0V to 3,3V.
          AGKB_PWR_EN_N signal is floating too (that is why+3VALW_AG not stable).
          Power LED is not working as well, power button working well.
          UI26 ??? is there any firmware too? Powered by +3VALW_AG.

          Motherboard...
          05-04-2025, 09:35 AM
        • bociub
          laptop freezes, usb 2.0 not working, usb 3.0 working
          by bociub
          Hi there,

          It is sunday and I got a faulty hp pavilion 15-cs1006na. No available schematics on the entire world. It flashed 5 long 4 short and no post then I discovered the usb 2.0 2. pin in one of the usb-a socket bent backwards and been shorted to 2. and 3. pin of the 3.0. after removing this short in the port the laptop came alive.

          Now the laptop freezing randomly. The webcam, the built in mic and according to the device manager one more thing not working which are connected to usb. If I connect anything what have usb 2.0 plug that wont work if i plug anything what...
          08-25-2024, 03:44 PM
        • Loading...
        • No more items.
        Working...