advice needed please will the main board be a fault if i have no power to the t con board cheers
-
-
Re: t con no power
https://www.badcaps.net/forum/showthread.php?t=53026
You should stay with one thread.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: t con no power
generally speaking yes,however some SMD tcon fuses are slightly over-rated and will not fail upon a t-con short,paticularly a partial short,which can happen,which then instead pulls down the supply rail to next to nothing.Try checking the supply with the T-con disconnected,if you haven't already done so.Fairly commonplace is a 8 pin switching device for this voltage.Comment
Comment