LG 3DTV 47LW5700 full screen of artifacts on power on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ChaosLegionnaire
    HC Overclocker
    • Jul 2012
    • 3259
    • Singapore

    #1

    LG 3DTV 47LW5700 full screen of artifacts on power on

    today, when my mom turned on her tv to watch the dark knight rises on tv, the picture was fine for a few mins at first, then it deteriorated to a full screen of artifacts like an abstract art painting as shown in the attachment. i tried power cycling the tv but it still turns on and displays the lg logo as a screenful of artifacts. after we tried running the tv for 15 mins, the picture cleared up a bit but it was still very wavy and liney.

    any idea whats wrong with the tv? i only encountered artifacting problems like this when my computers had a gpu that died. could it be either bad caps or a cracked solder joint since the artifacts cleared up a bit when the tv heated up for awhile?
    Attached Files
  • dick_barton
    Badcaps Legend
    • Aug 2015
    • 6642
    • Wales

    #2
    Re: LG 3DTV 47LW5700 full screen of artifacts on power on

    Service manual to start you off is available
    http://tinyurl.com/zydl969
    Willing to help but I'm no expert.

    Comment

    • Diah
      Badcaps Legend
      • Feb 2013
      • 6343
      • Germany

      #3
      Re: LG 3DTV 47LW5700 full screen of artifacts on power on

      did she watch it with 3D ?

      if yes or no, took the tv out from the plug for long time, to reset T.CON

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain

        #4
        Re: LG 3DTV 47LW5700 full screen of artifacts on power on

        Panel fault IMO. Try reflowing motherboard.
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • Diah
          Badcaps Legend
          • Feb 2013
          • 6343
          • Germany

          #5
          Re: LG 3DTV 47LW5700 full screen of artifacts on power on

          IMO... Mr. Panel..

          hard reset enough by IN_Start from any Android Mobile with IR sender..

          Comment

          • ChaosLegionnaire
            HC Overclocker
            • Jul 2012
            • 3259
            • Singapore

            #6
            Re: LG 3DTV 47LW5700 full screen of artifacts on power on

            Originally posted by Diah
            did she watch it with 3D ?

            if yes or no, took the tv out from the plug for long time, to reset T.CON
            no she watched it in 2d. it was an analogue OTA broadcast.

            exactly how long is "long"? i tried unplugging it till the standby light went out for about 30 mins and turned it back on but still a similar artifact pattern.

            Comment

            • Diah
              Badcaps Legend
              • Feb 2013
              • 6343
              • Germany

              #7
              Re: LG 3DTV 47LW5700 full screen of artifacts on power on

              order menu by RC, if it show make factory reset, if not show menu

              use In_STOP then put code 0413 TV will go standby them after while you turn it on.
              Last edited by Diah; 03-13-2016, 06:08 AM. Reason: IN-STOP order

              Comment

              • ReeceyBurger123
                Never Give Up !
                • May 2014
                • 7325
                • Britain

                #8
                Re: LG 3DTV 47LW5700 full screen of artifacts on power on

                Originally posted by Diah
                IMO... Mr. Panel..

                hard reset enough by IN_Start from any Android Mobile with IR sender..
                Its PanelBurger to you ! Also IMO=In My Opinion.
                Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                https://www.facebook.com/Telford-Tel...7894576335359/

                Comment

                • ReeceyBurger123
                  Never Give Up !
                  • May 2014
                  • 7325
                  • Britain

                  #9
                  Re: LG 3DTV 47LW5700 full screen of artifacts on power on

                  Try reflowing the motherboard I bet the Bga solder is failing as you said it cleared up.
                  Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                  https://www.facebook.com/Telford-Tel...7894576335359/

                  Comment

                  Related Topics

                  Collapse

                  • Ryan.man
                    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                    by Ryan.man
                    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                    02-04-2025, 12:23 PM
                  • smic717394
                    iphone XS turns off when press on screen.
                    by smic717394
                    Hi,

                    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                    07-25-2024, 10:16 AM
                  • Chrissygizmo
                    Samsung UE55JU6800K half screen dark
                    by Chrissygizmo
                    Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                    I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                    02-10-2025, 12:33 AM
                  • spice_disc
                    Vizio TV M50-C1 reboot cycle and static on screen
                    by spice_disc
                    I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                    The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                    09-08-2024, 02:37 PM
                  • ipatch
                    ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                    by ipatch
                    i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                    08-24-2024, 02:36 PM
                  • Loading...
                  • No more items.
                  Working...