I have done a ton of research on Seiki repair and have had no luck finding anything. Unfortunately Sieki has some of the worst customer service I have ever experienced. It started one morning when I turned the TV on I saw a grey screen slowly appear from the bottom up in a hazy crawling motion. It still has sound. I replaced the TCON board with no luck, actually might have made it worse, so I put the original back in and ordered a main board. The new main board fixed the issue for about two weeks. Now I see the same crawling grey screen every time upon start up in the morning. Occasionally a power reset will get it working but I usually have to let it run for ten minutes and then do a power reset. Could be a heat related connection issue?
The most recent issue has been an error message when trying to play a playstation3 through the HDMI which reads "unsupported data" with blue screen behind it. Yet at the same time I can switch the input to the cable box and that will work, also an HDMI port. The same thing occurs where I have to reset TV or let it run a while to get the error message to stop. If you have any suggestions please let me know. Thank You.
The most recent issue has been an error message when trying to play a playstation3 through the HDMI which reads "unsupported data" with blue screen behind it. Yet at the same time I can switch the input to the cable box and that will work, also an HDMI port. The same thing occurs where I have to reset TV or let it run a while to get the error message to stop. If you have any suggestions please let me know. Thank You.
Comment