Telefunken TS32D875L5, panel problem Sharp LK315T3LA31, lower third black

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain
    #21
    Re: Telefunken TS32D875L5, panel problem Sharp LK315T3LA31, lower third black

    Connections inside the glass.
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

      Comment

      • michael dranfield
        Badcaps Veteran
        • Jan 2016
        • 232
        • England
        #22
        Re: Telefunken TS32D875L5, panel problem Sharp LK315T3LA31, lower third black

        Originally posted by Chungalin
        One thing I don't understand is how T-CON communicates with lateral Gate drivers. There's no cable from any of them to T-CON or top PCB. Gate drivers are just bond to the glass and that's all.
        Conductive tracks are printed onto the glass surface you can see them with a magnifying glass or microscope.

          Comment

          • Chungalin
            Badcaps Veteran
            • Jul 2014
            • 422
            • Spain
            #23
            Re: Telefunken TS32D875L5, panel problem Sharp LK315T3LA31, lower third black

            Well, I just wanted to report that another technician lent me a T-CON for this panel, exactly the same numbers and...

            the winner is...

            Reecey!!

            It does exactly the same effect. Replacement T-CON even included both FFC to the panel.

            I'm gonna dismiss this one, unless Diah has something to add. O course one could say that this second T-CON has the same failure than the first.

              Comment

              • ReeceyBurger123
                Never Give Up !
                • May 2014
                • 7325
                • Britain
                #24
                Re: Telefunken TS32D875L5, panel problem Sharp LK315T3LA31, lower third black

                As I suspected I have seen ALOT of them and tried lots to fix them. Pure Samsung trash. Thanks for the update
                Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                https://www.facebook.com/Telford-Tel...7894576335359/

                  Comment

                  Previous 1 2 template Next

                  Related Topics

                  Collapse
                  • advant
                    Driving a Sharp TCON/panel with a universal main board
                    by advant
                    This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                    I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                    02-03-2020, 12:25 AM
                  • Andrew453
                    Crestron TPS-2000L with Sharp LQ5AW136R panel
                    by Andrew453
                    I have numerous Creston TPS-2000L touchpanel home automation devices, which incorporate a Sharp LQ5AW136R panel. They all exhibit the same fault. They are about 10-15 years old.

                    The fault can be seen in the attached photo. Basically the displays are all washed out, to be point of being unreadable.

                    Clearly it's an issue with the panel. But my question is whether it's just aging related (e.g. all the pixels in the LCD wearing out) or whether it could actually be a more specific component (i.e. one capable of being individually replaced). I've seen suggestions on other...
                    01-28-2023, 02:54 PM
                  • howardc64
                    LG 49UJ6500 LCD panel lighter band that goes away
                    by howardc64
                    49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

                    Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
                    02-19-2023, 12:13 AM
                  • triplefour
                    SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
                    by triplefour
                    TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

                    tcon is built into mainboard.
                    Only one cable goes to panel boards.
                    there is a cable from one panel board to the other that links them.
                    cost cutting measure that results in us having harder time to diagnose.
                    removing the link to the second panel board allows TV to stay on with stable backlight but no image.
                    used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
                    07-28-2022, 07:59 PM
                  • Storyteller12
                    QN55Q60R Service Menu Panel Help
                    by Storyteller12
                    I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

                    I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

                    I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

                    the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
                    01-13-2024, 01:57 PM
                  • Loading...
                  • No more items.
                  Working...