Changhong LED49YD1100UA Blinks power light 8 times

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zukdj
    Senior Member
    • Jun 2012
    • 104
    • USA
    #1

    Changhong LED49YD1100UA Blinks power light 8 times

    Hi all, I have a 1 year old 49" Changhong off brand LED TV (LED49YD1100UA), when I went to turn it on the other day the power light gives 8 blinks and stops, it doesn't power on, not sure how to troubleshoot this but I am sure the 8 blinks is a code for a specific error. I've looked all over and it is difficult to find info online for this TV. Just wondering, has anyone run across this issue on one of these TV's per chance that could give me a rough idea of what this issue is? I'd hate to throw it away as I currently have it all apart and looking it over none of the caps look bad, it was purchased late 2014 for my wife and I as a thank you gift for some work I did for a friend.

    Whiskey - Tango - Foxtrot!
    Tags: None
    • zukdj
      Senior Member
      • Jun 2012
      • 104
      • USA
      #2
      Re: Changhong LED49YD1100UA Blinks power light 8 times

      Bueller....Bueller??? LOL, I guess this TV is such an odd one that nobody has an answer.

        Comment

        • Alastair E
          Chief Womble
          • Mar 2013
          • 1963
          • U.K.
          #3
          Re: Changhong LED49YD1100UA Blinks power light 8 times

          Pictures of internals could help....

          So many of these cheapo-chinese things around without seeing it--who knows what it is.
          TELEFIX

          How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
          http://www.irf.com/technical-info/appnotes/an-1088.pdf
          PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

            Comment

            • bellidoria
              New Member
              • Nov 2016
              • 1
              • United States
              #4
              Re: Changhong LED49YD1100UA Blinks power light 8 times

              Hi
              Did you figure out what was wrong? I have the same TV, also a bit over 1 year old and am having the same problem.

              Not sure if it's an easy fix or if I should toss it.

              Thank you for your help

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA
                  #5
                  Re: Changhong LED49YD1100UA Blinks power light 8 times

                  Originally posted by bellidoria
                  Hi
                  Did you figure out what was wrong? I have the same TV, also a bit over 1 year old and am having the same problem.

                  Not sure if it's an easy fix or if I should toss it.

                  Thank you for your help
                  You will not get much help without uploading good clear pictures of the whole back side of the TV showing all the boards and pictures of each board. We do not have the TV in front of us to see what we are dealing with.
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment

                    • Aleph
                      New Member
                      • Apr 2017
                      • 1
                      • United States
                      #6
                      Re: Changhong LED49YD1100UA Blinks power light 8 times

                      You must have bought your TV from NewEgg on nearly the same day that I did because mine went out within a few days off yours.

                      I opened mine up and saw a smudge of spot on the tconn board. One of the things you'll appreciate about Chinese market TVs is that they're alot easier to get into than their American market counterparts. If you see any carbon on a part, just match the model number and replace it. It worked for me and cost $12... As a bonus my insurer had written the TV off and replaced it.

                      I ordered my board off of Ali Express... It is not the exact same board as one the one that came with the TV but is about 98% similar and it works.

                      I hope you haven't tossed it yet. That TV is all plug and play on the inside and you can find everything you need on the cheap.

                        Comment

                        • facebook
                          New Member
                          • Oct 2019
                          • 2
                          • USA
                          #7
                          Re: Changhong LED49YD1100UA Blinks power light 8 times

                          I believe I have the same issue with Changhong LED50YC2000UA. The panel suddenly went blank, unpowered black. Turning the TV off shows the red standby LED. Turning on again causes the panel to temporarily power up (powered black screen) and immediately go to unpowered black with the standby light blinking 8 times. I removed the rear panel and looked at the boards, but was unable to identify what user Aleph says as "any carbon on a part".

                          Here are photos of my actual TV components: https://imgur.com/a/AFzpTzL

                          Any advice is very much appreciated!

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • Elecfronicsssss
                              DA0NJJMBAG0 charging light blinks
                              by Elecfronicsssss
                              Laptop motherboard DA0NJJMBAG0

                              PROBLEM-WHEN I PLUG THE CHARGER WITHOUT BATTERY THE CHARGING LIGHT BLINKS AND WHEN I PRESS POWER BUTTON THE CHARGING LIGHT STOPS BLINKING AND STAYS ON BUT THE POWER LIGHT DOESNT TURN ON AND LAPTOP ALSO DOESNT TURN ON NO FAN SPINS NO KEYBOARD LIGHT.

                              CHECKED- ON S5 STATE TGE LAPTOP HAS 5V ON USB 3.3V BUT I DIDNT GET 1.8VOLTS ON BIOS PIN NO 8 WHILE PLUGGED IN AND EVEN ON S5 STATE.

                              GUIDE ME WITH THE PROBLEM..

                              SUMMARY-
                              1.NO 1.8VOLTS ON BIOS PIN NO 8.
                              2.S5 STATE ((PRESSING POWER BUTTON)))VOLTAGES ARE PRESENT...
                              05-12-2025, 02:32 AM
                            • mecha1166
                              XR-77A80K Dead set, red light blinks 8 times. Cannot find error code list.
                              by mecha1166
                              I have a XR-77A80K here. When plug in & press power, white lindicator light flashes on & off. about 30 seconds later, indicator light flashes 8x red. Checked Sony, Power reset = unplug & plug in. Factory reset involves turning it on, then pressing remote buttons when a picture shows. Well, neither of these "resets" are for a dead set like this. Anyone know what 8 blinks indicates, from the schematic? Thanks!
                              07-01-2024, 05:47 PM
                            • kca
                              Samsung UN60F8000BFXZA ~ No Picture or Sound - 5 Res Light Blinks
                              by kca
                              Hello all ~

                              I’m working on this Samsung 60” LED and purchased a new main board a couple of days ago that did not fix the 5 blink issue. The original main board’s HDMI ports (all 4 of them) failed to work and no amount of reflow remedied that.

                              This 5 red light blink code on the front panel LED is followed (about 15-20 seconds afterward) by an automatic reboot, and results in 5 more red light blinks. Then the entire cycle repeats itself indefinitely.

                              No picture. No sound.

                              I tested all the voltages coming out of the power supply...
                              10-12-2023, 05:23 PM
                            • Alicat
                              Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                              by Alicat
                              Hello,

                              Stopped by this site trying to fix my parents Panasonic Plasma TV.

                              Model number is TH-50PZ85U

                              Power comes on and the red power light stays on solid.

                              Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                              I also hear a few clicks.

                              I also think my parents said there was a thunderstorm and the TV failed after that.

                              Section 6 in the service manual talks about power and no screen,...
                              10-30-2024, 10:09 AM
                            • Samunggg
                              Samsung UN70NU6900FXZA - Red Light Blinks 2 Times Then Screen Flickers
                              by Samunggg
                              I've happened upon this TV, it came with no power cord or remote and it seems to be experiencing a common issue where the red indicator light blinks 2 times then the screen flickers as if it's trying to turn on. No picture, no sound. I suspect the functions of the TV are in good order and that the underlying issue is with the power button which is missing. It's just a white tab where the button should be which means I can't cycle it.

                              I wanted to know if there is anything I can do or if I should just get a replacement module with the hopes it will fix the system. Alternatively if...
                              09-06-2023, 06:39 PM
                            • Loading...
                            • No more items.
                            Working...