Re: Pioneer lx6090 2 x flashing red light at start up
Hi, thanks for the fast reply , first i need to get this tv upstairs to put it on a table where it can be for a time for repair as i probably need to order one or more parts and it should be not fixed on one day.
I can buy another lx6090 but i dont know the problem on the screen, but maybe for parts if the panel is faulty.
There is a line on the screen in the left corner at the downside of the screen, should it be a faulty panel or also a problem with some of the cards, search a lot for finding this problem in forums but nothing found from a pioneer with this problem
http://i67.tinypic.com/2gwx1fd.jpg
-
Re: Pioneer lx6090 2 x flashing red light at start up
Link to service man:
Attached FilesLeave a comment:
-
-
Re: Pioneer lx6090 2 x flashing red light at start up
Nice Tv wait for Tom66 to chime in he will help you out, but if you get stuck DO NOT BIN IT OR SELL IT well worth waiting and spending money it to repair. I think two red blink is a fault on the Ydrive board. You can start by uploading images of the boards inside the Tv please.Leave a comment:
-
Pioneer lx6090 2 x flashing red light at start up
Hi since today my pioneer don't start up anymore. When it in standby the red light work and when i power up the tv with the remote control you hear the click as usual but there is no image, the blue led will also not go on but the red standby led flashing 2 times.
Somebody have a clue what is wrong with the screen and is it easy to repair it as i love the screen, hope to get it repair as it is still the best tv i have had.
-
The TV is a 2013 Samsung plasma, model # PN60F5300AFXZA.
Snagged it up in non-working condition a couple years ago. Previous owner said that sometimes he could get it to come on after repeated tries but other than that he couldn't get it to turn on.
Personally I haven't been able to get it to turn on at all. The standby light comes on solid when plugged in, but pressing the power button results in the standby light flashing once every 4 or so seconds. No "click" noises, no light from the panel at all. Just the flashing standby light.
No visible... -
Have a Samsung UE43KU6400U that will not turn on, just continuous flashing red standby light.
Power button does nothing
Have unplugged the mainboard, and backlights illuminate.
Have tried removing panel ribbon cables one at a time, and that makes no change.
With mainboard unplugged, all voltages from powerboard seem ok, but with mainboard connected, they never quite reach full voltage, and drop and raise in a constant loop (in time with click noise from mainboard.
Using backlight tester, I get 63.6v on both sides, so seems like no bulbs... -
This is a set I posted about a few years ago. Replaced LED strips and worked fine until now.
Plug the set in, and it will turn on and functions with no issues.
After a while, (sometimes hours, sometimes minutes, sometimes immediately) the tv shuts off. When I approach the TV I notice the standby light is flashing rapidly, but the pulse of each flash is not long enough to notice from afar.
Other than the standby light, the unit is completely unresponsive until the power is removed and reapplied, then the cycle starts over. It does appear that the time it takes... -
Hello everyone,
I got a Samsung The Frame 55 inch TV for free from uncle cause it is not turning on anymore. I am in the second year of training as an electrician so I have knowledge already but I am far away from to be a pro.
The TV has Standby but ist not turning on. A Friend of mine owns a 50 inch Frame TV so I checked the One Connect Box and the One Connect Cable there. Both are good and working normally. I have opened the TV case and measured some voltages on the Board.
What I already found is that the 12.8V are not an the connector to the main board connector to the power... -
Hello everyone.
This is my development machine. I've been using it since two years and half without any problem except sometimes it wouldn't wake up from sleep.
Lately the issue became more frequent and powering it up would take few seconds to show the POST screen.
Then the computer refuses to power on at all. Now only the caps lock button flashes 7 times then stops. The charging light is always on whenever a power source is connected (battery or charger).
I tried long pressing on the power button, after several seconds it would go off then when the button is released...
Leave a comment: