Philips DVP642 DivX DVD player

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • shadow99
    Member
    • May 2007
    • 24
    #1

    Philips DVP642 DivX DVD player

    I've got 2 of these:
    http://www.techtastic.ca/reviews3/dvp642.html
    Basic DVD players with DivX. Great little players but one wouldnt turn on at all, the standby light was on and that's it.
    After the cover was off there was an obvious problem, a bulging cap on a small board and if I recall correctly it was a 470/25.
    Replacing it brought the player back to life.
    A very easy fix.
    Last edited by shadow99; 04-24-2008, 09:06 AM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • ictc
      Philips MDP 3380/12 Blu-ray Player – No Power, Reset Signal Always High
      by ictc
      I'm troubleshooting a Philips MDP 3380/12 Blu-ray player that shows no signs of life. The display remains off, and no buttons respond.

      Inside, the power supply is working correctly, and all expected voltages on the mainboard match the service manual specifications. The CPU warms up slightly (checked with a thermal camera), the crystal oscillator is functioning, but the reset signal remains high at all times.

      The reset circuit appears to consist of two NPN transistors, one driven by 5V VCC and the other by 3.3V STBY, as shown in the attached schematic. Should the reset...
      02-25-2025, 12:15 PM
    • Document Archive
      MEDION AKOYA S15447 + ext. DVD Player Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the MEDION AKOYA S15447 + ext. DVD Player Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the S15447 + ext. DVD Player boardview and S15447 + ext. DVD Player schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any...
      09-06-2024, 05:30 PM
    • alro7779
      Philips 32PFL4901/F8 BA4GF0F0102 2 Not getting standby led
      by alro7779
      Hello, guys!

      The same 32" Philips TV I was having video issues, but now I don't have standby led at all. Someone here shared with me the schematic of the power supply, and checking the voltages, I see right after the resistor R604 I'm getting 1.6 v which is too low for enabling the Gate of the Q601 mosfet (the diagram says 4.2). On the R614 resistor I'm getting 181 V in and 117 V out, then through R603 I'm getting the same 117 V in and 59.9 V out, finally getting the latter voltage in the R604 BUT getting just 1.6 V out, which is the voltage that goes on to the Gate of the Q601...
      09-14-2025, 12:25 AM
    • G33RT
      Philips 8200 series 65PUS8204/12 stuck at Philips Logo
      by G33RT
      Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

      It does power up when pressing the power button.

      I already try the power button while plugin the plug with no result.
      Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

      Could this be an PSU or eMMC issue ?
      07-19-2025, 03:43 AM
    • kokopelli75
      Victrola multi-player - No audio
      by kokopelli75
      Hello!

      My mother has a Victrola Navigator player that stopped functioning after a storm. I checked out what I could - all player functions appear to work, but there is no audio output in either the speakers or the headphone jack. I suspect (with my limited knowledge) that the amplifier part of the device is toast. Photo of the suspected board is attached. There's separate boards for front display, record player, etc. This board has a section for power regulation and a section for amp. There's a UTC7266 7+7W dual bridge amplifier IC and a CSC2314F sound processor IC on the board. Visually,...
      1 Photo
      01-11-2025, 03:51 PM
    • Loading...
    • No more items.
    Working...