Merry Christmas, please help to panasonic l39em5b , ssb tnp4g539, on a 39inch tv, crash 15 flasuri Front LED source inverter,, ok,, LED'm ok, I put an empty memory instead 24c16 the old ic901 and LED front does not light up, ic902 24c32 I have not tampered with it, I would try something a dumpuri for ic901 24c16 and ic902 24c32, rewriting flash memory programmer can not speak, I programmer for it, type flash memory is NAND flash h27u1g8f2btr- TSOP48, thank you
-
Last edited by iuliantv; 12-25-2015, 01:11 PM. -
Re: panasonic l39em5b dump 24c32 24c16
hohoho
-
Hi,
I'm looking for Panasonic CF-54 bios dump.
Flash memory with bios is damaged and is not possible to recover any information from it.
Model Name - CF-54DY024NG
S/N: 6DTSA61473
Thank You... -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
Comment