Hitachi 32HXC01 - another Vestel joke

[flocko]

Re: Hitachi 32HXC01 - another Vestel joke

But landfill is the best place for them ?

[ReeceyBurger123]

Re: Hitachi 32HXC01 - another Vestel joke

Yep for about 6 months till it next fails haha

[ReeceyBurger123]

Re: Hitachi 32HXC01 - another Vestel joke

But landfill is the best place for them ?

Goddam right !

[comptek]

Re: Hitachi 32HXC01 - another Vestel joke

LOL !
Got a bush 24" with 275 hours on it diodes went

[ReeceyBurger123]

Re: Hitachi 32HXC01 - another Vestel joke

This one had 1460 hours on it ! But 275 is a fucking joke !

[Augustus]

Re: Hitachi 32HXC01 - another Vestel joke

sorry its fully working i just wanted to know how to copy firmware incase i or other people needed it at some point lol

You need 2 things:

- An spi flash programmer. I have used this one with success (it works by paralell port):

- SOIC8 SOP8 Flash Chip IC Test Clips Socket Adapter (or to solder one wire to each pin of eeprom):


And, of course, the program for make the dump. I have used this one with success: http://rayer.g6.cz/programm/programe.htm#SPIPGM

Two things are important on vestel tv (and, in general, in all tv): the panel, and the main board. If you have a dump of both flash eeprom of an especific vestel tv, would be useful for other one if the panel and the main board are the same. I think the main thing is the model of panel, while main board is maybe not so important if they are not exactly the same (less or more usb or hdmi, etc). Of course, I'm talking about 17MB82.

Fixed the one I picked up today Shorted 24v diode, replaced all output diodes and all is good

Then, you can make a dump of both flash eeproms.

[comptek]

Re: Hitachi 32HXC01 - another Vestel joke

This one had 1460 hours on it ! But 275 is a fucking joke !

it is a bit lolol its in mint condition no wear on it anywhere good as new

[comptek]

Re: Hitachi 32HXC01 - another Vestel joke

[QUOTE=Augustus;611022]You need 2 things:

- An spi flash programmer. I have used this one with success (it works by paralell port):


are they cheap? not sure if i have anything with a paralell port lol

[Augustus]

Re: Hitachi 32HXC01 - another Vestel joke

are they cheap? not sure if i have anything with a paralell port lol

The programmer is soooooo chip!!! But.....you have to do it by yourself!!!! And, if you don't have a parallel port computer, you can ask a friend....

There's another option of an usb programmer, CH341A, for a price of about 3 dollars (search on ebay).

The test clips socket adapter has a price of about 4 dollars. Do you think it's expensive??? You can try to do this:



Maybe you think it's dangerous to solder wires on eeprom pins...... Let's see:

[comptek]

Re: Hitachi 32HXC01 - another Vestel joke

wow cool Augutus that looks right up my street if i need any help or info may i send you a private message if i have any problems that is

[flocko]

Re: Hitachi 32HXC01 - another Vestel joke

I like your (comptek)post about the 24" Bush being as good as new, this set in all its different disguises only just made it out of the shop before blowing diodes,these should have come with a bungee cord fitted to the back, to return them back to were ever they were brought from(most will have an Argos sticker on it).

[comptek]

Re: Hitachi 32HXC01 - another Vestel joke

I like your (comptek)post about the 24" Bush being as good as new, this set in all its different disguises only just made it out of the shop before blowing diodes,these should have come with a bungee cord fitted to the back, to return them back to were ever they were brought from(most will have an Argos sticker on it).

Lol Flocko i know.....11 hours use before failing... i have a deal with a guy who gets argos returns some broken screens and some just dead ... got to take the rough with the smooth well rough and even rougher :p
yesterday was ok 2 fully working now 3 smashed screens boards are ok so quids in

[Augustus]

Re: Hitachi 32HXC01 - another Vestel joke

Im buying the Tv off him buddy.

Ok. So, when you receive the tv, you can post an image of model of panel, to see if it's like this (LC320DXJ-SFE1):

http://**************/dump/lcd_pdp_tv/hitachi/lcd_led_tv_hitachi_32hxc01_sh_17mb82_2/242-1-0-10820

wow cool Augutus that looks right up my street if i need any help or info may i send you a private message if i have any problems that is

Ok but, you know, my english is not very good.....Don't know if I'm going to understand you, or if even you are going to understand me...... But.....don't you think would be better to open a thread and share your experience? Then, we can show people how to make dumps of those eeproms.....and how to write a file to an eeprom.

[comptek]

Re: Hitachi 32HXC01 - another Vestel joke

Ok. So, when you receive the tv, you can post an image of model of panel, to see if it's like this (LC320DXJ-SFE1):

http://**************/dump/lcd_pdp_tv/hitachi/lcd_led_tv_hitachi_32hxc01_sh_17mb82_2/242-1-0-10820



Ok but, you know, my english is not very good.....Don't know if I'm going to understand you, or if even you are going to understand me...... But.....don't you think would be better to open a thread and share your experience? Then, we can show people how to make dumps of those eeproms.....and how to write a file to an eeprom.

yes of course i understand

[ReeceyBurger123]

Re: Hitachi 32HXC01 - another Vestel joke

Got the Tv here, I was able to get it to fire on by heating the mainboard I copied the firmware on to a usb through NVRAM download in the SM and reflashed it (spi flash chips can be temperature sensitive) after reflashing it and letting it cool back to square one. So time to keep diagnosing

Also someone has tampered with the Psu and broke some traces on it so got to fix that as well

[fingersd]

Re: Hitachi 32HXC01 - another Vestel joke

Hi guy's. I'm after a bit of advice. I've been looking for a replacement 17MB82-1a 23111172 to replace my dead board (PSU and LED Board appear OK) but can't find anything available anywhere.

If I get a 17MB82-1a and swap out the 2 eprom chips would this be enough to get it to power up? (or is it likely to be the winbond bios chip's that have failed)

TIA