Re: Question: It's FT-5537T05C08 T-COM board a substitute for FT-5537T04C29?
I have written an email to shopjimmy, but for now, they didn't answer yet, and maybe is possible that I won't have an answer...
Finally, I get access to the shopjimmy website, through a proxy service, and, unfortunately, they don't have stock for both T-CON boards. It's clear that, for them, the boards are fully compatible each other.
Maybe the question now is: wich models of tv are suspect to be or not compatible? And the answer is clear: buy a T-CON board and make the prove....
Augustus
Member
Last Activity: 12-18-2017, 10:16 AM
Joined: 11-27-2015
Location: Andalucía
-
Re: Question: It's FT-5537T05C08 T-COM board a substitute for FT-5537T04C29?
Sorry for my insistence, but, it's OK they are fully compatible? One can replace the other? Have I to ask at shopjimmy's?
I ask it because there is a difference of price between them, so the FT-5537T05C08 is more cheaper than the FT-5537T04C29.
The original T-COM board for my faulty tv is the FT-5537T04C29.
I found that an e-mail for shopjimmy is [email]sales@shopjimmy.com[/email]. Is it OK?
Again, thank you.Re: Question: It's FT-5537T05C08 T-COM boardLeave a comment:
-
Re: Question: It's FT-5537T05C08 T-COM board a substitute for FT-5537T04C29?
Thank you very much for your response.
I don't have an account at shopjimmy, so I can't get to it.
I have read both pdfs documents, and seems that they are fully compatible each other, so, this confirms it all, right?
Then, doesn't mind if I use one type or another? What I need is the FT-5537T04C29 T-CON board.
And, yes, I know the gamma problem, but the AS-15 has been replaced, and the problem stills. Maybe I will open a new thread...Leave a comment:
-
Question: It's FT-5537T05C08 T-COM board a substitute for FT-5537T04C29?
Hello, I have a question about compatibility of two T-COM boards that are used in worlwide LCD TV'S.
The first is the FT-5537T04C29. This board is assembled in 37" european lcd tv. A model that assemble this board is the SONY KDL-37P5600. The model of panel is T370HW02 V.B. Here's a picture:
[URL="https://www.badcaps.net/forum/attachment.php?attachmentid=150755&d=1486090898"]
https://www.badcaps.net/forum/attachment.php?attachmentid=150755&d=1486090898[/URL]
The second one is the FT-5537T05C08. This board is assembled in the SONY... -
Re: Hitachi 32HXC01 - another Vestel joke
Ok. So, when you receive the tv, you can post an image of model of panel, to see if it's like this (LC320DXJ-SFE1):
[URL="http://**************/dump/lcd_pdp_tv/hitachi/lcd_led_tv_hitachi_32hxc01_sh_17mb82_2/242-1-0-10820"]http://**************/dump/lcd_pdp_tv/hitachi/lcd_led_tv_hitachi_32hxc01_sh_17mb82_2/242-1-0-10820[/URL]
Ok but, you know, my english is not very good.....Don't know if I'm going to understand you, or if even you are going to understand me...... But.....don't...Last edited by Augustus; 12-02-2015, 06:15 PM.Leave a comment:
-
Re: Hitachi 32HXC01 - another Vestel joke
The programmer is soooooo chip!!! But.....you have to do it by yourself!!!! And, if you don't have a parallel port computer, you can ask a friend....
There's another option of an usb programmer, CH341A, for a price of about 3 dollars (search on ebay).
The test clips socket adapter has a price of about 4 dollars. Do you think it's expensive??? You can try to do this:
Maybe you think it's dangerous to solder wires on eeprom pins...... Let's see:
...Leave a comment:
-
Re: Hitachi 32HXC01 - another Vestel joke
You need 2 things:
- An spi flash programmer. I have used this one with success (it works by paralell port):
- SOIC8 SOP8 Flash Chip IC Test Clips Socket Adapter (or to solder one wire to each pin of eeprom):
And, of course, the program for make the dump. I have used this one with success: [URL="http://rayer.g6.cz/programm/programe.htm#SPIPGM"]http://rayer.g6.cz/programm/programe.htm#SPIPGM[/URL]
Two things are important on vestel tv (and, in general, in all tv):...Last edited by Augustus; 11-28-2015, 02:38 PM.Leave a comment:
-
Re: Hitachi 32HXC01 - another Vestel joke
Hi, like other people said, it's possible you have a corrupt firmware, who is present on two flash eeproms.
Would be good you post a complet image of the main board, and a image of the model of the panel.
In the main board, what is the serigraphed reference (I think it's a 17MB82-X)?Leave a comment:
-
Re: Bush (Vestel) led40127fhdcntd - turns off and on repeatedly
I've had tried the same, but with a vestel 17MB82-2 (works OK), same configuration (scart), and this is what I get:
I have tried with different baud rate, but I get same result (or even nothing at all). What I'm doing wrong?
Thank you very much....Leave a comment:
-
Re: New Members - please post your introductions here
Hello everybody!!!!
I've been involved into electronics from long time ago, so came here to share some info and try to fix all that I can.
Thank you very much.Leave a comment:
No activity results to display
Leave a comment: