Hitachi 32HXC01 - another Vestel joke
Collapse
X
-
Re: Hitachi 32HXC01 - another Vestel joke
Reflow what part ? Also if you get an epprom anaylser you can copy the software for the Tv off its flash Ic.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
Hmm nice one will try it I got the exact same Tv you have the C01U picking it up tomorrow stuck in standby eill see what the fault is might do a thread.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
i use a toothpick to tap components and wiggle legs etc the latest one was dead and i poked about it fired up left it a while plugged in dead poked again it fired up reflowed with hotair station for ages and all is okComment
-
Re: Hitachi 32HXC01 - another Vestel joke
Hmm strange wander if its common on these ? you do realize that flash Ics can be affected by heat and go intermittent or did you let it cool down I presume ?Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
it will be good to see if its a common thing or just pure fluke 2 in a rowComment
-
Re: Hitachi 32HXC01 - another Vestel joke
Probably common knowing Vestels crappy engineering hahaPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
Picking on up tomorrow wander what it could bePlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
http://i984.photobucket.com/albums/a...k/DSC01542.jpg
heres a pic from my original post its around u12 u17 all around there i reflowedComment
-
Re: Hitachi 32HXC01 - another Vestel joke
Cheers matePlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
did it on 280 then 300 then after kept lowering the heat slowly 280/250/200/180 etcComment
-
Re: Hitachi 32HXC01 - another Vestel joke
Cool beans mean, will use a microscope and iron to reflow if I find anythingPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
Will do knowing my luck probably something stupid haha I actually like fixing these even though they are trashPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
Hi, like other people said, it's possible you have a corrupt firmware, who is present on two flash eeproms.
Would be good you post a complet image of the main board, and a image of the model of the panel.
In the main board, what is the serigraphed reference (I think it's a 17MB82-X)?Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
Im buying the Tv off him buddy.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Hitachi 32HXC01 - another Vestel joke
Fixed the one I picked up todayShorted 24v diode, replaced all output diodes and all is good
The 32HXC01U uses a 17IPS19-5 Psu and 17MB82-2 which is slightly more reliable then the 17MB95S-1 boards in my experience.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
Related Topics
Collapse
-
by massimomaxChiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
spero che qualcuno può averlo per riprogrammare eprom. grazie
Post in English !!!
I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you
-
by AskicHello guys,
I have 32 inch Hitachi TV with Vestel PSU board 17IPS71. Tv was working normally and I shut it down normally via remote control.
The next morning it couldn't turn ON neither with remote controller or via button on the logic board.
There is a red standby LED ON, so it is not dead totally.
I have examined the PSU board and I cannot find find any traces of blown components or bulged caps. Electrolytic caps are manufactured by Elite.
I also check diodes and big MOSFET (with cooler/heatsink). It seems OK.
Can you tell me based on... -
by EnricoS92Hello,
I have a problem with this tv Hitachi with vestel 17MB171 board.
I turned off a couple days ago and the next morning when I turned on it had the issue, i tried to left the power unplugged for several hours but nothing.
The tv turns on shows the logo picture and after a few seconds reboots, and start over again.
I was able to connect via uart to the tv and grab the log I attached, it has logged 3 reboots.
I believe it is a corrupted software, but I could not find any online, does anyone has it, or where to download.... -
by France_53Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing...
-
by RuptorI couldn't find any other thread that matches my TV problem but have been told it is a common fault. The fault is a flashing LED as if it is in upgrade mode that happens after a few seconds and stays forever. I can't remember all the tricks that have been tried like holding the select button when powering on but nothing worked. The shop sent me a flash drive to plug in a USB port but that did nothing either and they said it was dead which is disgusting for a piece of solid state electronics. I took the back off eventually after removing 34 screws to check for blown caps but everything looks new...
- Loading...
- No more items.
Comment