Samsung UN46EH5300 No Backlight, Help!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Toastybunz
    New Member
    • Oct 2015
    • 2
    • United States

    #1

    Samsung UN46EH5300 No Backlight, Help!

    I got this TV for free and was hoping to get it working. The backlight is out but I am able to see snow and the menu with a bright light shining on the screen. I bought a new PSU/LED driver board from Shop Jimmy hoping this would fix the problem but I just installed it and unfortunately I have the same issue.

    Any ideas?
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Samsung UN46EH5300 No Backlight, Help!

    How about uploading good clear pictures of the whole backside of the TV so we can see all the boards?
    I will not be surprised if it has failed backlights LEDs.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • pc55
      Member
      • Aug 2013
      • 28
      • USA

      #3
      Re: Samsung UN46EH5300 No Backlight, Help!

      Since the LED driver board is good, it is most likely faulty LED bulbs. They are fixable, but a pain to get to. You can either replace the LED strips, or just the individual LED bulbs. ShopJimmy has a LED Bulb tester for about $54- but you can search for the same model and find it for at least $20 cheaper elsewhere. It is a nice little tool that automatically adjusts the voltage to test bulbs individually, by strip, or all the strips at once. There are many YouTube videos about how to fix- the most comprehensive one I have seen was from TampaTec on YouTube, where he goes thru the whole breakdown of the TV he is using for the video.

      I have one 32" TV apart, but could get the LED bulb to desolder! So I am awaiting a strip from ShopJimmy. Then I will see if I can re-assemble the TV without damaging it;-) Oddly, I have a second model, the same as yours, with the same issue- the LEDs are out, and I am getting ready to dive into it as well;-)
      Last edited by pc55; 04-10-2017, 06:33 PM.

      Comment

      • n2jtx
        New Member
        • Jun 2017
        • 2
        • United States

        #4
        Re: Samsung UN46EH5300 No Backlight, Help!

        Two weeks ago I found a UN46EH5300 being thrown out by a neighbor. The manufacture date is October 29, 2013. I brought it home and determined through a flashlight in the back plus an over 200V reading on the LED power supply that the LED string is bad. I have searched YouTube for Samsung specific instructions on removing the back panel but have had no luck. Does anyone know of instructions for doing this as they pertain to Samsung? I have the service manual and I see that it does not contain disassembly instructions that detailed.

        Comment

        Related Topics

        Collapse

        • Document Archive
          Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-07-2024, 05:50 AM
        • C152Heavy
          Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
          by C152Heavy
          Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

          Summary for TL-DR readers:
          • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
          • Have obtained Samsung schematic & service documents - Can upload if helpful.
          • Have read ALL applicable threads
          • C1818 and CP820 replaced as low hanging fruit
          • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
          • VCC pin (18) of PFC...
          01-11-2023, 02:53 PM
        • sansanpartida
          Samsung QE82Q70RAT no backlight
          by sansanpartida
          Hi everyone!

          Hope you're all having a great day, and thank you very much for stopping by and taking the time to read this post to help me with my parents' Samsung TV.

          My issue: No backlight.

          Model: QE82Q70RAT
          Type No: QE82Q70RAT

          The TV was already serviced by Samsung once under warranty for the exact same issue, but six months after the fix, the backlight went out again. Now, Samsung is asking for nearly the same price as a brand new TV to fix this with the same 6-month guarantee.

          So hopefully, I can fix this cheaper.
          ...
          05-22-2024, 06:56 AM
        • howardc64
          Samsung UN55NU7300F Curved TV. Half side backlight out. Fixed by just removing the rear snap cover
          by howardc64
          TV was fixed just after removing Samsung's rear snap cover.

          This curved TV's construction is rather interesting. When the snapped on back is removed, rest of the TV will relax the curvature. Top of LCD panel is loose as it wants to straighten out against the slightly curved bezel. Snapped back provide most of the curvature shape. So just simple disassembly of rear cover will allow the rest of the TV frame to relax its curvature. Thats probably what fixed it but no idea which connection. 4x LEDs are edge lit.

          Maybe PSU->backlight connector didn't have a good contact?...
          07-23-2025, 12:34 AM
        • howardc64
          Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
          by howardc64
          • Prior owner tried a replacement main board. No difference.
          • Samsung 2x red blinking standby LED = panel fault
          • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
          • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
          • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
          ...
          07-19-2025, 10:54 PM
        • Loading...
        • No more items.
        Working...