TX-P50GT30E Replace SS Board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • picciolino
    New Member
    • Sep 2015
    • 8
    • italia
    #1

    TX-P50GT30E Replace SS Board

    Hi All,

    my tv is broken the SS-Board is dead (8 blinking led).
    I tried to repair it but the Mos and the diode are good.
    I need your help for replace this board.
    I search the SS BOARD TNPA5331AG (board Broken)but I found on the shop jimmy store only the TNPA5331AJ.

    It s possible to change the dead board "AG" with the new model board "AJ"?
    What is the difference?
    The board seems the same in the picture.
    I suspect that the new board AJ is better than old board AG.

    Can you help me?

    Thank a lot

    Andrea
    Last edited by picciolino; 09-21-2015, 02:57 PM.
    Tags: None
    • sordids999
      Badcaps Legend
      • May 2013
      • 2149
      • uk
      #2
      Re: TX-P50GT30E Replace SS Board

      Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem

        Comment

        • picciolino
          New Member
          • Sep 2015
          • 8
          • italia
          #3
          Re: TX-P50GT30E Replace SS Board

          Originally posted by sordids999
          Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem
          Thank you a lot for your help,
          below you can find the picture.
          Sorry for the bad resolution, tomorrow i will resend it.

          Thanks
          Attached Files

            Comment

            • tw2005
              Badcaps Legend
              • Oct 2011
              • 6458
              • Australia
              #4
              Re: TX-P50GT30E Replace SS Board

              AJ should be fine it's also 50GT30 in the US. Looking at it the only difference will most likely be the panel connector. Appears to be a flip up type on yours and on the AJ the tabs slide out from the front, insert ribbon then press the tabs back into secure it.

              No it won't be any better, same board really just different hardware used.

                Comment

                • picciolino
                  New Member
                  • Sep 2015
                  • 8
                  • italia
                  #5
                  Re: TX-P50GT30E Replace SS Board

                  Originally posted by tw2005
                  AJ should be fine it's also 50GT30 in the US. Looking at it the only difference will most likely be the panel connector. Appears to be a flip up type on yours and on the AJ the tabs slide out from the front, insert ribbon then press the tabs back into secure it.

                  No it won't be any better, same board really just different hardware used.
                  Thank you

                  you think that will be possible to insert the panel flat cable in the new connector of new board (AJ)?

                    Comment

                    • tw2005
                      Badcaps Legend
                      • Oct 2011
                      • 6458
                      • Australia
                      #6
                      Re: TX-P50GT30E Replace SS Board

                      Originally posted by picciolino
                      Thank you

                      you think that will be possible to insert the panel flat cable in the new connector of new board (AJ)?
                      yes

                        Comment

                        • picciolino
                          New Member
                          • Sep 2015
                          • 8
                          • italia
                          #7
                          Re: TX-P50GT30E Replace SS Board

                          Originally posted by tw2005
                          yes
                          Thanks a lot,

                          I will let you know

                          Ciao

                            Comment

                            • picciolino
                              New Member
                              • Sep 2015
                              • 8
                              • italia
                              #8
                              Re: TX-P50GT30E Replace SS Board

                              Originally posted by picciolino
                              Thanks a lot,

                              I will let you know

                              Ciao
                              Hello i finally changed the SS board (bought from shopjimmy) and when i plug it into my tv Showed 8 LEDs.
                              I verified the cable side and the flat D board
                              I saw that the cable flat was oxidized and after cleaning my television set is turned on.


                              thank for all

                                Comment

                                • tw2005
                                  Badcaps Legend
                                  • Oct 2011
                                  • 6458
                                  • Australia
                                  #9
                                  Re: TX-P50GT30E Replace SS Board

                                  Originally posted by picciolino
                                  Hello i finally changed the SS board (bought from shopjimmy) and when i plug it into my tv Showed 8 LEDs.
                                  I verified the cable side and the flat D board
                                  I saw that the cable flat was oxidized and after cleaning my television set is turned on.


                                  thank for all
                                  Sometimes they fight to the end

                                    Comment

                                    Previous template Next

                                    Related Topics

                                    Collapse
                                    • m1ch43lzm
                                      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                      by m1ch43lzm
                                      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                      05-12-2025, 08:37 PM
                                    • Tynan Dill
                                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                      by Tynan Dill
                                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                      Upon bringing it home and plugging it up, it showed a standby light.

                                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                      Assuming...
                                      ORIGINAL POWER SUPPLY BOARD
                                      7 Photos
                                      11-22-2024, 01:46 PM
                                    • Hakuu
                                      LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                                      by Hakuu
                                      Hi There,

                                      This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                                      After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                                      More Details

                                      TV Model - LG OLED77G1PUA

                                      Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                                      07-12-2023, 02:37 PM
                                    • jb_Bak
                                      Sony xbr-65x900c main board issues?
                                      by jb_Bak
                                      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                                      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                                      Power Board Connector that goes to Main board
                                      CN6401
                                      Pin 01 NC
                                      Pin 02 NC
                                      Pin 03 "BL_ON": 0V
                                      Pin 04 "N/C"
                                      Pin 05 "STBY 3.3V": 3.5V
                                      Pin 06 "GND": N/C
                                      Pin 07 "AC_OFF"...
                                      09-27-2021, 04:52 PM
                                    • canadaboy25
                                      Panasonic TC-P54VT25 No image. A or D board?
                                      by canadaboy25
                                      I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

                                      The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

                                      I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
                                      01-17-2021, 01:06 AM
                                    • Loading...
                                    • No more items.
                                    Working...