Announcement

Collapse
No announcement yet.

what controls the 5v standby on this power supply?>

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    what controls the 5v standby on this power supply?>

    I have less then 1 v on this 5v standby on this power supply can anyone guide me what to fix or test to fix it? the fuse is good.
    Apex HDAD240W401 (MT40420, 909H1504) Power Supply for LD4088
    Attached Files

    #2
    Re: what controls the 5v standby on this power supply?>

    The small transformer on the bottom right is the STBY power supply section.
    I see 3 small lytics caps to the left of the transformer that you should check or replace. You can try heating them up with hair dryer them apply the power to the board to see if you will get normal Voltage.
    The devices on the heatsink to the right are the rectifier diodes that you should also test.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    Working...
    X