Panasonic Plasma Input Issues

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ahall13
    New Member
    • Jul 2015
    • 2
    • United States
    #1

    Panasonic Plasma Input Issues

    I've tried to do some research, so I would like to verify my findings or see if there is a way to troubleshoot further before buying parts.

    I received a 55" Panasonic Plasma (assembled 2008). The screen turns on and I can access all of the menus, but it is not detecting HDMI or component video. I tried two devices and didn't get sound or video with those inputs. Hooking up a coax cable the tv has picture and sound, so it is just an issue with the inputs.

    From my reading I'm gathering this is probably the logic/main board. Anyone want to point me in a direction to troubleshoot more or provide some feeback on my thoughts?
    Tags: None
    • sordids999
      Badcaps Legend
      • May 2013
      • 2149
      • uk
      #2
      Re: Panasonic Plasma Input Issues

      Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem

        Comment

        Previous template Next

        Related Topics

        Collapse
        • jm1234
          Panasonic plasma TX-P42ST50 - 6 blinks
          by jm1234
          Hi,
          anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
          It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
          I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
          I checked that board for any obvious faults...
          05-22-2024, 06:59 AM
        • stecos
          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
          by stecos
          Hi everyone!
          I happened several times, in the search for help from the web, to consult this very interesting forum.
          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

          Having said that I come to the gist of my post on the forum as the title suggests.
          For my passion for technology I'm now collecting several...
          11-28-2022, 11:39 AM
        • Alicat
          Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
          by Alicat
          Hello,

          Stopped by this site trying to fix my parents Panasonic Plasma TV.

          Model number is TH-50PZ85U

          Power comes on and the red power light stays on solid.

          Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

          I also hear a few clicks.

          I also think my parents said there was a thunderstorm and the TV failed after that.

          Section 6 in the service manual talks about power and no screen,...
          10-30-2024, 10:09 AM
        • Lintesir
          Panasonic P42S30 Plasma - Pink sparkles
          by Lintesir
          My parents' Panasonic P42S30 died recently, and they asked me to have a look at it. I was able to identify the SN-board as the culprit, as it was shorted. After removing Q401, Q402, Q421 and Q422 the short was gone, so I replaced these components and that got the TV working again. However, when testing the tv a bit, I noticed quite bad pinkish sparkles on some colors. For instance the greyish bar on this forum seems to trigger it quite badly. I made a fullscreen test picture with only that color, with the below result.

          There is about a 5cm high region at the top without any sparkles,...
          07-26-2024, 03:16 AM
        • hugocarmo
          Panasonic TX-24A1UN CRT Sound and Input problem.
          by hugocarmo
          Hi.

          I´ve been given an old CRT from Panasonic, it´s almost new, it was storaged and almost not used since bought.
          It is imaculate inside, almost no dust or debris inside.
          The picture is good, but I have no left sound channel, I tried all the inputs, outputs, even on headphone jack. In AV2 I hear sound from right channel but no image, on tv tuner only right sound channel, the same for AV1.
          So I started to look for a service manual, I found one, and started from the beginning.
          Most of the times the caps are the problem so I orderer all the caps for all boards,...
          04-26-2025, 07:45 PM
        • Loading...
        • No more items.
        Working...