toshiba 32av555d wont turn on

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cvel
    Senior Member
    • May 2015
    • 64
    • United Kingdom

    #21
    Re: toshiba 32av555d wont turn on

    Unplugged board with HDMI ports on and TV stays in standby mode no clicking just solid red standby light

    Comment

    • cvel
      Senior Member
      • May 2015
      • 64
      • United Kingdom

      #22
      Re: toshiba 32av555d wont turn on

      Unplugged board with HDMI ports on and TV stays in standby mode no clicking this time just solid red standby light

      Comment

      • Hamie
        Badcaps Legend
        • Apr 2014
        • 1383
        • UK

        #23
        Re: toshiba 32av555d wont turn on

        You can't unplug that board as the TV won't turn on as the power supply gets the ps-on signal from the mainboard.

        I'm talking about unplugging the inverter board. I believe it must be hidden underneath the mainboard.

        Comment

        • cvel
          Senior Member
          • May 2015
          • 64
          • United Kingdom

          #24
          Re: toshiba 32av555d wont turn on

          Yes I unplugged that first and TV still does same thing

          Comment

          • Hamie
            Badcaps Legend
            • Apr 2014
            • 1383
            • UK

            #25
            Re: toshiba 32av555d wont turn on

            Ok well there's not much more you can do untill we get some voltages.

            It might be worth heating up the mainboard and seeing if it comes back to life.

            But if that doesn't work you'll need to wait until you get your meter.

            Comment

            • cvel
              Senior Member
              • May 2015
              • 64
              • United Kingdom

              #26
              Re: toshiba 32av555d wont turn on

              OK thank you its getting a little late now so will try heating main board tomorrow if doesn't work I will wait for the multimeter to be delivered and get back to you thank you for your help so far its very much appreciated.

              Comment

              • cvel
                Senior Member
                • May 2015
                • 64
                • United Kingdom

                #27
                Re: toshiba 32av555d wont turn on

                Good afternoon, I have tried heating the main board and nothing happened to I changed all the caps that can today from Amazon and still no change multimeter should be here Tuesday or Wednesday

                Comment

                • cvel
                  Senior Member
                  • May 2015
                  • 64
                  • United Kingdom

                  #28
                  Re: toshiba 32av555d wont turn on

                  Hi sorry it's been a while I now have a multimeter to hand if you could help me with trying to find this fault I would be very great full thank you

                  Comment

                  Related Topics

                  Collapse

                  • ChristianBr01
                    LED TV Samsung The Frame 55 inch QE55LS03RAU Standby Light only
                    by ChristianBr01
                    Hello everyone,
                    I got a Samsung The Frame 55 inch TV for free from uncle cause it is not turning on anymore. I am in the second year of training as an electrician so I have knowledge already but I am far away from to be a pro.
                    The TV has Standby but ist not turning on. A Friend of mine owns a 50 inch Frame TV so I checked the One Connect Box and the One Connect Cable there. Both are good and working normally. I have opened the TV case and measured some voltages on the Board.
                    What I already found is that the 12.8V are not an the connector to the main board connector to the power...
                    04-23-2025, 01:48 AM
                  • Document Archive
                    Toshiba Satellite Pro C660-1NQ Specification for Upgrade or Repair
                    by Document Archive
                    This specification for the Toshiba Satellite Pro C660-1NQ can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the C660-1NQ boardview and C660-1NQ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
                    09-06-2024, 05:27 AM
                  • Jackching
                    Samsung UN46EH5000F wont turn on. Blinks red standby light continuously
                    by Jackching
                    I know for sure it has a bad cap and one cold solder joint. Just wondering before i order the Caps if anyone has any experience with this model? Just making sure there isnt a common component that goes bad besides the caps....
                    04-15-2024, 05:14 PM
                  • PNI E.
                    Samsung ue55tu7170u not turn on and no standby led main bn9650990e
                    by PNI E.
                    Hi guys, I’m back here my friend give me her tv, that doesn’t turn on and no standby red led. When u plug in the cord the red led of one two second is on, then turn off. If you push the power button or the remote the red led blinks but nothing happen. I give u some photo with voltage, don’t look the fuse….because I blow it for mistake nd I dint have the right replace so I just put it for test the tv. The standby voltage should be 11,88 volt on the diode, but I have 13 volts. I put in the photo the different volts I test and there are someone negative…I don’t know if it s normal. On...
                    03-17-2025, 04:23 AM
                  • Kaar3l
                    Samsung QLED QE65Q7FNAT only standby light
                    by Kaar3l
                    TV: Samsung QLED QE65Q7FNAT
                    PSU: BN4400940A
                    MB: BN94-12832K

                    I got the tv in spring 2024. At that time it started, then ran 60 sec and poweroff. Seemed like reboot issue. I didn't have time and room to check it in summer so I plugged it in and now the standby light is on. I press button on remote, standby light goes off and tries to start?. No picture or backlight on LCD. I thought about removing diodes like in this thread: https://www.badcaps.net/forum/troubl...sung-qled-q60r...
                    09-24-2024, 01:35 PM
                  • Loading...
                  • No more items.
                  Working...