First and foremost, thank you all for sharing your knowledge. I can't tell you how much so many of us "noobs" appreciate it.
I have a 60" Sharp, model #LC60LE64OU, that came into my shop. When you press the power button the Sharp logo flashes 2 long and 5 short, nothing appears on the display. On tear down one of the flex cables from the backlight to (what I think is) the T-Con board is burned (see photo). I've procured replacement ribbons but I see no burned components on the board, neither side. All the capacitors look good too, so I'm down to board swapping and was wondering which of the three I should start with? Or are there components I should test instead and if so on which board?
Thank you in advance, your knowledge is greatly appreciated!
I have a 60" Sharp, model #LC60LE64OU, that came into my shop. When you press the power button the Sharp logo flashes 2 long and 5 short, nothing appears on the display. On tear down one of the flex cables from the backlight to (what I think is) the T-Con board is burned (see photo). I've procured replacement ribbons but I see no burned components on the board, neither side. All the capacitors look good too, so I'm down to board swapping and was wondering which of the three I should start with? Or are there components I should test instead and if so on which board?
Thank you in advance, your knowledge is greatly appreciated!
Comment