42pfp5532d

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thuss
    Badcaps Veteran
    • Jul 2012
    • 321
    • uk
    #1

    42pfp5532d

    Hi

    Ive got a philips plasma tv which when turned on shows for a second a normal picture and then just goes to a blank screen.

    The standby light is on.

    I disconnected the boards one by one stays the same.

    Has anybody come across this before?

    thanks in advance
    Tags: None
    • sordids999
      Badcaps Legend
      • May 2013
      • 2161
      • uk
      #2
      Re: 42pfp5532d

      Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem

        Comment

        Previous template Next

        Related Topics

        Collapse
        • hasel17
          CH341a can erase and read but can't write and blank check
          by hasel17
          So I am trying to repair broken thunderbolt FW on X1 Yoga Gen 2. The EEPROM chip is WINBOND 25Q80DVNIG. I already do a back-up and erase. But when I try to wrote new FW, it was successfull, but when I tried to read it, it still blank. when I try to do a blank check, it gave me instant error in address 0. I already tried two CH341A, already did the 3.3v fix mod, using AsProgrammer, NeoProgrammer, Colibri, and CH341A 1.29. But the problem still occurred. What I did wrong here? Can anyone help me? Thanks in advance. Here is the log in Colibri :

          Code:
          Checking for blank...
(Press
          ...
          10-26-2023, 06:20 AM
        • alro7779
          Philips 32PFL4901/F8 BA4GF0F0102 2 Not getting standby led
          by alro7779
          Hello, guys!

          The same 32" Philips TV I was having video issues, but now I don't have standby led at all. Someone here shared with me the schematic of the power supply, and checking the voltages, I see right after the resistor R604 I'm getting 1.6 v which is too low for enabling the Gate of the Q601 mosfet (the diagram says 4.2). On the R614 resistor I'm getting 181 V in and 117 V out, then through R603 I'm getting the same 117 V in and 59.9 V out, finally getting the latter voltage in the R604 BUT getting just 1.6 V out, which is the voltage that goes on to the Gate of the Q601...
          09-14-2025, 12:25 AM
        • G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo
          by G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

          It does power up when pressing the power button.

          I already try the power button while plugin the plug with no result.
          Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

          Could this be an PSU or eMMC issue ?
          07-19-2025, 03:43 AM
        • kotel studios
          Funai 32FL553P/10 - squealing from PSU, dies after 10 seconds, blank screen after logo, bootloops
          by kotel studios
          Hi,

          Found an Funai 32FL553P/10 TV on sale for cheap listed as broken, so I decided to give a shot at reparing this.

          State I got it in:
          Squealing from the PSU
          After logo I get a blank screen
          After 10 seconds of having a blank display w/ backlight the TV dies
          Give it 7-10ish seconds again and it starts to bootloop.

          What I did so far:
          Replaced all the caps on the PSU (apart from primaries, they were fine and none at hand)
          Checked all voltage rails:
          5VSB - 4.8V
          AMP+13V - 14.4V
          13V - 12.98V (in manual 12V)...
          09-21-2025, 02:00 AM
        • double_DD
          Philips curling iron - is this a common AC cable?
          by double_DD
          Hi all,

          Wife has 2 Philips hair curling irons half defective - after learning how they're supposed to work and testing them, it turned out that both have defective power cables, and both on the same place; broken wires due to wire bending.
          As they were both relatively easy to disassemble, and cables are plugged not soldered (as they can rotate in the handle), I was sure it would be easy to find replacements. But - NO! I'm unable to find anything similar on ebay or Aliexpress.

          Not sure if this is something Philips proprietary, or a standard, but the cable plug...
          08-18-2025, 10:04 AM
        • Loading...
        • No more items.
        Working...