Vizio 32" TV E320-A0

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ToastyZ71
    New Member
    • Jul 2014
    • 2
    • USA

    #1

    Vizio 32" TV E320-A0

    I was given this TV as it was not working. the power LED would liight up, but then pushing the power button, would get no display and the power light would fade out. I read on this forum and other places that it was likely something on the main board, whether the EEPROM or otherwise. I simply went on Ebay and bought a replacement main board "seller refurbished, so a dice roll there, I guess.

    So I got the replacement board, and it powers up and seems to work, but then it starts turning itself off randomly. (sometimes when changing inputs, but mostly just random) I have to unplug it for a few seconds, then plug it back in, and it will turn on. Of course I am going to contact the seller of the board I got, but I am also looking to see if maybe I can fix either the new or the old board. - Should I be testing anything else, or is it pretty safe to say the EEPROM is the source here?

    the main board is part number 3632-2112-0150



    Thanks!

Related Topics

Collapse

  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • m1ch43lzm
    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
    by m1ch43lzm
    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
    05-12-2025, 08:37 PM
  • jb_Bak
    Sony xbr-65x900c main board issues?
    by jb_Bak
    Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

    Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
    Power Board Connector that goes to Main board
    CN6401
    Pin 01 NC
    Pin 02 NC
    Pin 03 "BL_ON": 0V
    Pin 04 "N/C"
    Pin 05 "STBY 3.3V": 3.5V
    Pin 06 "GND": N/C
    Pin 07 "AC_OFF"...
    09-27-2021, 04:52 PM
  • canadaboy25
    Panasonic TC-P54VT25 No image. A or D board?
    by canadaboy25
    I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

    The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

    I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
    01-17-2021, 01:06 AM
  • sam_sam_sam
    Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
    by sam_sam_sam
    I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

    This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

    After all of...
    07-13-2024, 08:14 PM
  • Loading...
  • No more items.
Working...