Jumping on a Plasma PSB

[Hamie]

So I sold a power supply board on ebay.
The customer returned the board claiming it was faulty.

The problem is the board was fully checked and worked perfectly before I sent it to them. The board was removed from a tv with a faulty (not broken panel).
And vs va vg voltages etc were all near on perfect.

So either the board has broken down, or the customer had another issue and decided to just lie that my board was faulty to return it.

Either way, I want to jump the board on and check it its still working but the board doesn't have a PSON that I can find to do so.

I've already jumped VSON to 5vstby.

Can someone tell me what to jump instead of PSON to GND

[tom66]

Re: Jumping on a Plasma PSB

What pins does it have? ON/OFF, RL_ON, M5V_ON etc.?

[Hamie]

Re: Jumping on a Plasma PSB

Can you see the ones in the picture tom?
Would you like me to take a closer photo?

[selldoor]

Re: Jumping on a Plasma PSB

Well I cant see them very well - please repost in focus one using manage attachments
It would be helpful if you took it or turned it so it is easily readable